The footbridge is subsequently fitted with damping devices. After this measure, the bridge can be analysed as a damped single-degree-of-freedom oscillator with mass m, stiffness k and damping coefficient c. The damping ratio achieved by fitting the bridge with additional dampers is ζ=0.125. 1) If the same experiment is repeated, how long will three complete cycles of vibration take? 2) Determine the values of the vibration amplitudes after one and after two cycles. 3) Sketch (at least) two cycles of the resulting free vibration responses u(t) of both the undamped and damped system in one displacement-time-diagram.

Facilities/equipment, Layout, and Work Design are outcomes of capacity planning and process selection.

Capacity planning refers to the method that balancing existing resources to meet project capacity requirements or customer demand. The quantity of work that can be finished in a specific length of time is referred to as capacity in program management and production.

Making ensuring your distribution network is constantly prepared and equipped to meet demand is the aim of capacity planning. By incorporating this kind of strategy development into your workflow, you may better meet deadlines, expand your firm, and boost your profits.

To know more about Capacity planning visit:

https://brainly.com/question/13484626

#SPJ4

A "contingency" waste allowance is added to concrete calculations to allow for spillage during placement.

When concrete is being placed, there is a possibility of spillage or loss due to factors such as pouring, spreading, or even accidental mishaps. To account for this potential waste, a contingency waste allowance is added to the concrete calculations. This allowance acts as a buffer or safety margin to ensure that enough concrete is ordered and available to complete the desired project without running short. It helps to compensate for any unforeseen loss or spillage during the concrete placement process, ensuring that sufficient material is available for the intended construction or application.

A contingency waste allowance is included in concrete calculations to account for any potential spillage, inaccuracies, or other factors that may lead to waste during the placement process. This ensures that there is enough concrete available to complete the project without delays or shortages.

Learn more about spillage:

https://brainly.com/question/29764629

#SPJ11

Answer:

A. Yes, it will run

B. X will not replace any value

Explanation:

A. Will it run?

First, the algorithm can be interpreted in python as follows:

#Set Minimum to 1

MINIMUM = 1

#For every element X in the list L

for X in L:

#If current element X is less than MINIMUM

    if X < MINIMUM:

#Set MINIMUM to X

         MINIMUM = X

#Print MINIMUM

print(MINIMUM)

The algorithm will run without error because it follows the right sequence and has no syntax error

B. Will X replace any value?

No, it won't

The smallest positive integer is 1.

So, setting the MINIMUM to 1 means that the value of X in the list will not replace the MINIMUM because the MINIMUM has already been set

two feet or less

Answer:

SECTION LEARNING OBJECTIVES

By the end of this section, you will be able to do the following:

Distinguish between static friction and kinetic friction

Solve problems involving inclined planes

Section Key Terms

kinetic friction static friction

Static Friction and Kinetic Friction

Recall from the previous chapter that friction is a force that opposes motion, and is around us all the time. Friction allows us to move, which you have discovered if you have ever tried to walk on ice.

There are different types of friction—kinetic and static. Kinetic friction acts on an object in motion, while static friction acts on an object or system at rest. The maximum static friction is usually greater than the kinetic friction between the objects.

Imagine, for example, trying to slide a heavy crate across a concrete floor. You may push harder and harder on the crate and not move it at all. This means that the static friction responds to what you do—it increases to be equal to and in the opposite direction of your push. But if you finally push hard enough, the crate seems to slip suddenly and starts to move. Once in motion, it is easier to keep it in motion than it was to get it started because the kinetic friction force is less than the static friction force. If you were to add mass to the crate, (for example, by placing a box on top of it) you would need to push even harder to get it started and also to keep it moving. If, on the other hand, you oiled the concrete you would find it easier to get the crate started and keep it going.

Figure 5.33 shows how friction occurs at the interface between two objects. Magnifying these surfaces shows that they are rough on the microscopic level. So when you push to get an object moving (in this case, a crate), you must raise the object until it can skip along with just the tips of the surface hitting, break off the points, or do both. The harder the surfaces are pushed together (such as if another box is placed on the crate), the more force is needed to move them.

The estimated total maintenance cost for August based on an estimated 7,000 patient days is $9,255.

To estimate the total maintenance cost for August based on the given data, we can use the slope-intercept form of a linear regression equation:

Y = mx + b

Where Y represents the maintenance cost, X represents the patient days, m is the slope, and b is the intercept.

Given values:

Intercept (b) = $5,468

Slope (m) = $0.541

To estimate the total maintenance cost for August (X = 7,000 patient days), we can substitute the values into the equation:

Y = (slope × X) + intercept

Y = (0.541 ×  7,000) + 5,468

Calculating the expression:

Y = 3,787 + 5,468

Y = $9,255

Therefore, the estimated total maintenance cost for August based on an estimated 7,000 patient days is $9,255.

To learn more on slope intercept form click:

https://brainly.com/question/9682526

#SPJ4

The following data was input into a spreadsheet program to determine the Intercept, Slope and R2 (RSQ) for Patient Days and Maintenance Costs for a local hospital: Month Patent Days (X) Maintenance Costs (Y) January 6,600 $8,900 February 8,100 $9,500 March 6,000 $8,400 April 7,500 $9,200 May 8,300 $10,100 June 9,000 $10,800 July 5,200 $8,800 Intercept $5,468 Slope $0.541 RSQ 0.79

The estimated total maintenance cost for August based on an estimated 7,000 patient days is:

$9,255

$7,186

$7,985

$7,529

Answer:

The answer will be B i hope this helps

Answer:

Textile Technologists work with a variety of materials including man-made and natural textiles, leather, fur, plastic and metals. They may be responsible for developing fabrics for furnishings, clothing, household items, medical supplies, or textiles for use within the automotive industry.

Assuming that the system shown consists of a mass suspended from a spring, we can use the formula for natural frequency to calculate the answer.

The natural frequency of a spring-mass system is given by the formula:

ωn = sqrt(k/m)

where ωn is the natural frequency in radians per second, k is the spring constant in newtons per meter, and m is the mass in kilograms.

Plugging in the given values, we get:

ωn = sqrt(365 N/m / 4.3 kg)

ωn = sqrt(84.8837)

ωn = 9.214 rad/s (rounded to three decimal places)

Therefore, the natural frequency in radians per second for the system shown is approximately 9.214 rad/s.

To learn more about frequency click the link below:

brainly.com/question/24629429

#SPJ11

The resistance to bending increases by a factor of approximately 11.32 when using a W18 × 76 beam compared to a W8 × 31 beam about the x-x axis.

To calculate the factor by which the resistance to bending increases when using a W18 × 76 beam compared to a W8 × 31 beam, we need to consider the moment of inertia (I) of the beams. The resistance to bending is directly proportional to the moment of inertia.

The moment of inertia for a beam can be calculated using the following equation:

I = (1/12) * b * h^3

where:

- I is the moment of inertia

- b is the width of the beam's cross-section

- h is the height of the beam's cross-section

For the W18 × 76 beam:

- b = 6.97 inches

- h = 17.9 inches

Calculating the moment of inertia for the W18 × 76 beam:

I1 = (1/12) * 6.97 * (17.9)^3

For the W8 × 31 beam:

- b = 8.03 inches

- h = 7.99 inches

Calculating the moment of inertia for the W8 × 31 beam:

I2 = (1/12) * 8.03 * (7.99)^3

Now, we can find the factor by which the resistance to bending increases:

Factor = I1 / I2

Calculating the factor:

Factor =\([(1/12) * 6.97 * (17.9)^3] / [(1/12) * 8.03 * (7.99)^3]\)

After performing the calculation, we find that the factor is approximately 11.32.

Therefore, the resistance to bending increases by a factor of approximately 11.32 when using a W18 × 76 beam compared to a W8 × 31 beam about the x-x axis.

Learn more about resistance at https://brainly.com/question/17563681

#SPJ1

true

the answer to this question is true

Among the given options, the statement concerning RSS that is false is option B. "Blogs cannot be part of an RSS feed."

RSS stands for Rich Site Summary or Real Simple Syndication. It is an XML-based file format that is used for web syndication and content distribution. RSS allows users to subscribe to updates from their favorite websites or blogs. The following are the given statements and their explanations:A. A special reader is needed to display RSS content feeds.RSS content feeds can be displayed using special readers. These readers are also known as RSS feed readers or news aggregators. These applications collect and display RSS feeds from different sources in a single location. Users can subscribe to RSS feeds using these readers to get updates from their favorite websites or blogs.B. Blogs cannot be part of an RSS feed.This statement is false. Blogs can be part of an RSS feed. In fact, RSS feeds are commonly used by bloggers to distribute their content to their subscribers. RSS feeds allow bloggers to syndicate their content and reach a wider audience.C. Subscribers get notifications of changes in content.When users subscribe to an RSS feed, they receive notifications of changes in content. These notifications can be in the form of new articles, blog posts, or any other type of content. This allows users to stay updated with the latest content from their favorite websites or blogs.D. Users can customize the information they want and specify how often they want the information.Users can customize the information they want to receive from an RSS feed. They can choose which feeds to subscribe to and which ones to ignore. Additionally, users can specify how often they want to receive updates from these feeds. They can choose to receive updates in real-time or at specific intervals, such as every hour or every day.To sum up, all the given statements about RSS are true, except option B, which is false. Hence, option B is the correct answer.

To know more about Blogs, visit:

https://brainly.com/question/32804941

#SPJ11

Answer: False

Explanation:The correct two parts of the SERVQUAL survey are as follows: Customer expectations. Customer perception.

In the case, the software engineers present at the meeting would concern themselves with functional level strategy.

Software engineers create and construct computer systems and applications to solve problems in the real world. Software engineers usually referred to as software developers, create software for computers and apps.

Functional-level strategies are the tasks and goals assigned to various divisions to support your corporate strategy and business plan. These strategies outline the results you hope to obtain from the regular operations of particular divisions (or functions) of your company.

Things like prompt delivery of commodities, high-quality procedures and products, and process efficiency are examples of functional-level marketing techniques.

Therefore, in the case, the software engineers present at the meeting would concern themselves with functional level strategy.

To learn more about software engineers visit:

brainly.com/question/10339061

#SPJ12

Answer:

A. 1 J = 1 kg.m²/s²

Explanation:

Energy is defined as the ability to do work. The most basic equation or formula to find the magnitude of energy is given in terms of work. That formula is written as follows:

Energy = Work

Energy = Force * Displacement

Replacing these variables, with their S.I units:

Joule = Newton*m

where,

Force (Newton) = mass (kg) * acceleration (m/s²)

Newton = kg.m/s²

Therefore,

Joule = (kg.m/s²)(m)

A. 1 J = 1 kg.m²/s²

The correct option is c. The false statement about proxy reconstruction is Proxy reconstructions suggest today's climate is unusually warm compared to the past.

Proxy reconstruction is a technique used by scientists to study the climate before the invention of the thermometer by using a proxy that can be used to estimate the climate in the past. In proxy reconstruction, the scientists will gather data that can be used to indicate temperature and other climate features, such as ice cores, tree rings, and lake sediments, from different locations. The data is then analyzed and compared to current temperature readings. Inaccuracies can be caused by the use of a proxy with measurement limitations, insufficient or non-uniform data, or the subjectivity of interpretation of the data.

Among the choices, the false statement is c because the proxy reconstructions suggest that today's climate is not unusually warm compared to the past. The data collected from the proxies used in reconstructions show that Earth's climate has been warm in the past, even before humans were emitting greenhouse gases.

To know more about the proxy reconstruction visit:

https://brainly.com/question/31067273

#SPJ11

Answer:

Explanation:

Using the proper technique is incredibly important because it prevents the materials being joined from breaking and/or causing an accident. If the wrong joining technique is used the materials may not hold in place and come apart easily instead. Also, some joining techniques are not meant for some materials and may instead cause the material to become weak and brittle causing it to break apart almost immediately.

Joining describes a technique which is used to merge two or more independent materials together. The use of wrong joining technique or procedure could result in accident.

In engineering construction, the need to join materials together is always needed for so many reasons. Hence, depending on the materials to be merged, welding, soldering and some other techniques may be employed.

Therefore, wrong or inadequate joining may cause these parts to split or breakup, hence causing severe casualty.

Learn more : https://brainly.com/question/19114739

The Bidirectional Shift Register is the shift register that allows one to write a 5bit register if the series is shifted from left to right.

A 5-bit register is valuable because it can represent up to 32 items. It is to be noted that a bit is a digit that is binary that is indicative of two states.

While a 5-bit register can have a possible number of 32 values,

Learn more about registers at;
https://brainly.com/question/19091159
#SPJ1

Answer:

The volume of water needed to be removed = 4301100 lbs/ [ 62.43 × 27] = 2551.66.

Explanation:

The first thing to do right now is to determine the weight of soil solids. This can be gotten below as:

The weight of soil solids = 1 × 118 × 27 = 3186 lbs.

Also, there is the need to determine the value of the water that we have and the one that is needed. This is calculated below as:

The weight of water needed = 3186 × 6% = 191.16 lbs.

The water available = 3186 × 7% = 223.02%.

The next thing to determine is the value for the total BCY of available of soil.

Thus, the total BCY of available of soil = [ 3186 + 223.02 ]/ 2800 × 135000 = 3409.02/ 2800 = 1.217551 BCY × 135000 = 164,363.46 BCY.

The last thing to do here is to determine the value for the weight and  volume of water to be removed.

The weight of water to be removed = [ 223.02 lbs -  191.16 lbs] × 135,000 = 4301100 lbs

The volume of water needed to be removed = 4301100 lbs/ [ 62.43 × 27] = 2551.66.

Answer:

The annualized cost is:

$299,272.

Explanation:

a) Data and Calculations:

Year 0  Capital cost of road construction = $6 million

Year 10 Major improvements cost = $17 million

Year 25 Replacement and upgrade cost = $29 million

Year 40 Federal government one-time tax credit = $12 million

Period of project analysis = 50 years

Cost of capital (discount rate) = 10%

Annualized cost at present value costs:

Amount spent  Discount Factor     Present value

$6 million           1                               $6,000,000

$17 million         0.386                          6,562,000

$29 million       0.092                          2,668,000

($12 million)      0.0222                         (266,400)

Total cost                                          $14,963,600

Annualized cost = $14,963,600/50 =  $299,272

b) The annualized cost for the road construction project, which is the annualized value of the net present costs of $14,963,600, is divided by 50.  Before obtaining the net present costs, the cash outflows, including the tax credit, are discounted to their present values, using the discount rate of 10%.  And then, the average of the cost is obtained by dividing the total net present cost into 50 years.

Answer:

a pressure regulator is a controller that maintains a constant air pressure in a duct or building area

the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder remaining stationary is 11.0807 N-m.

we have left out some other important details, such as the time required to reach that rpm, whether the beginning state is at rest, and the axis around which the cylinder is revolving. However, we'll suppose that it will be 60 seconds (time is necessary to convert rpm to angular acceleration)

rotation around the center axis

Angular acceleration = torque + MOI

Currently, angular acceleration equals 2 rpm/(t 60).

In order to avoid getting an extremely high figure, we estimated that the diameter of the cylinder was 600 mm rather than 600 meters: angular acceleration= 1.047 rad/s² MOI for cylinder across center dia= 1/4MR²+ 1/12ML²

MOI= 10.5833 kg-m

Now, the product of these two is torque.

11.0807 N-m of torque

Various MOI equations can be used to compute for different axes of rotation.

Learn more about Acceleration here-

https://brainly.com/question/12550364

#SPJ4

The complete question is:

Crude oil at 20 c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. Find the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder remaining stationary.

Consequently, based on the explanations provided, Technician B is correct in asserting that the total resistance in a series circuit is the sum of all the resistances within that circuit.

Technician A and Technician B present two different statements regarding series circuits. Technician A claims that amperage is consistent at any point in a series circuit, while Technician B argues that the total resistance is the cumulative sum of all resistances in a series circuit.

According to Technician A, in a series circuit, where there is only one path for current flow, the amperage remains constant throughout the circuit. This implies that the current is identical at any point in the circuit. Thus, Technician A's statement regarding amperage in a series circuit is accurate.

Technician B's statement pertains to the total resistance in a series circuit. In this type of circuit, the total resistance is obtained by summing up all the individual resistances within the circuit. When resistors are connected in series, their resistances add up. Technician B's claim about the total resistance being the sum of all resistances in a series circuit is correct.

To know more about Technician visit:

https://brainly.com/question/32830409

#SPJ11

Answer:

Explanation:

The 7 Habits of Highly Effective People, is a book written and first published in 1989. It is a business and self-help book that was written by Stephen Covey. The seven habits include

Being proactive

Starting anything with the end in mind

First things first

Always thinking towards a win-win situation

Seeking initially to understand, then going on to want to be understood

Synergize, and lastly

Growing

The shear plane angle is approximately -88.43°, and the chip thickness is approximately 8.69 mm.

To determine the shear plane angle and chip thickness in a machining process, we need to consider the rake angle, uncut chip thickness, and chip length obtained.

Given:

Length of the specimen (L): 100 mm

Rake angle (α): 15°

Uncut chip thickness (t₀): 1.5 mm

Chip length obtained (l): 40 mm

The shear plane angle (φ) can be determined using the formula:

tan(φ) = \((l - L) / (2 * t₀)\)

Substituting the given values:

tan(φ) = (40 - 100) / (2 * 1.5)

tan(φ) = -60 / 3

tan(φ) = -20

Now, we can determine the shear plane angle (φ) using the arctan function:

φ = arctan(-20)

φ ≈ -88.43°

Note: The negative value indicates that the shear plane is inclined in the opposite direction to the cutting direction.

The chip thickness (t) can be calculated using the formula:

t = t₀ / cos(φ - α)

Substituting the given values:

t = 1.5 / cos(-88.43° - 15°)

t = 1.5 / cos(-103.43°)

t ≈ 1.5 / 0.1726

t ≈ 8.69 mm

Therefore, the shear plane angle is approximately -88.43°, and the chip thickness is approximately 8.69 mm.

For more questions on shear plane angle

https://brainly.com/question/13261982

#SPJ8

The phase of the engineering design process which should be completed next is to test their work and is denoted as option C.

These are the series of steps and techniques which are done by individuals in the making of functional product and services.This employs the use of scientific methods and also ensures an easier living for different individuals.

The first stage involves identifying the problem and then building a prototype through the use of different materials. This is then tested before the final finishing work is done to ensure the parts are properly placed before they are moved for evaluation by other people.

Read more about Engineering design here https://brainly.com/question/411733

#SPJ1