REE-September 2007 4. The wye connected three-phase voltage source has \( V_{c}=115 \mathrm{Vrms} \) with \( -240^{\circ} \) angle. Find the line to line voltage \( V_{b c} \). A. \( -99-j 173 \mathrm

Answer:

A. Loose concrete

Explanation:

Concrete is a solid composite structural material.It is the most used component in setting up a structure. Concrete is known for its very good ability to bear load, but can sometimes fail, or can be damaged. To rehabilitate or repair a concrete, the loose concrete must first be removed, so that the surface can be cleaned and well set before the material used for repair is applied on it.

A solid line around a component indicates that the component is complete. A dashed line around the component indicates that the component is being shown is not complete.

To determine the reactions at points A, B, and C, we will first need to analyze the forces and moments acting on the beam. Given that F1 = 450 N and F2 = 720 N, we can use the following steps:

1. Calculate the sum of the vertical forces, which should be equal to zero for static equilibrium:

ΣFy = Ay + By + Cy - F1 - F2 = 0

2. Calculate the sum of the moments about point A, which should also be equal to zero for static equilibrium:

ΣMA = (F1 * d1) + (F2 * d2) - (Cy * d3) = 0

Here, d1, d2, and d3 are the distances from point A to the points where the forces F1, F2, and Cy are applied.

3. Solve for the unknown reactions Ay, By, and Cy using the above equations.

Note that without the distances (d1, d2, and d3) or a diagram (Figure 1), it is not possible to provide specific numerical values for the reactions at A, B, and C.

learn more about analyze the forces here:

https://brainly.com/question/30815592

#SPJ11

Answer:

yes.

Explanation:

Critical reflection enhances the evaluation and improvement of heuristics and engineered/design solutions by identifying their effectiveness, biases, and areas for enhancement.

Critical reflection relates to heuristics and engineered/design solutions by providing a means to evaluate and improve upon them. Through critical reflection, one can assess the effectiveness and limitations of heuristics, which are mental shortcuts used for problem-solving, and engineered/design solutions, which are deliberate and planned problem-solving approaches.

It allows for a deeper understanding of their impact, potential biases, and areas for improvement, ultimately guiding the refinement and development of more effective problem-solving strategies.

Learn more about heuristics and engineered/design solutions on:

https://brainly.com/question/33326844

#SPJ1

Answer:

a) 208.33 A

b) 1.152 Ω

c) 0.03456 Ω

d)  6943.64 A

Explanation:

Transformer ratings :

Base power ( Sb ) = 50 KVA ,  

Transformer voltage = 2400 / 240 V ,  

Impedance ( Zp.u ) = 3.0 % = 0.03

phase = single ( 1 ) phase

Base Voltage on low side ( Vb ) = 240 V

a) Calculate the base current ( Ib )

Ib = Sb / Vb = ( 50 * 10^3 ) / 240

                    = 208.33 A

b) calculate base impedance ( Zb )

Zb = Vb^2 / Sb = ( 240 )^2 / 50000

                        = 1.152 Ω

c) Calculate the actual impedance ( Zact )

Zact = Zp.u * Zbase

       = 0.03 * 1.152 = 0.03456 Ω

d) Calculate the short circuit current ( Isc )

Isc = Vp.u / Zp.u      

     = 1 / 0.03 = 33.33 p.u

therefore Isc = 33.33 * Ib

                     = 33.33 * 208.33 = 6943.64 A

Answer:

The correct answer is He forgot to include indirect costs such as advertising, legal fees, and repairs.

Explanation:

a. use the one prime factor(N) routine to find a prime factor p of N. b .the algorithm will call the one prime factor(N) routine approximately n/2 times. c. this has a worst-case time complexity of O(n log n). time complexity of O(2^(n/2)), d. this algorithm is definitely an improvement.

Binary numbers are a number system that only uses two digits, 0 and 1, to represent numbers. In the binary system, each digit represents a power of two, with the rightmost digit representing 2^0 (1), the next digit representing 2^1 (2), the next digit representing 2^2 (4), and so on.

For example, the binary number 1010 represents the decimal number (1 x 2^3) + (0 x 2^2) + (1 x 2^1) + (0 x 2^0), or 8 + 0 + 2 + 0, which is equal to 10 in decimal.

(a) We can use the one prime factor(N) routine repeatedly to factor the given n-digit binary number into prime factors. We can repeatedly call the one prime factor(N) routine until we get all the prime factors of the number. After each call, we divide the input number by the prime factor obtained from the routine, and repeat the process until we have obtained all the prime factors.

Here is the pseudocode for the algorithm:

Input: n-digit binary number N

while N > 1:

  factor = one_prime_factor(N)

  print(factor)

  N = N / factor

(b) In the worst case, the input number may be a large prime number. In this case, the one prime factor(N) routine will return the input number itself as the prime factor. Therefore, we will need to call the one prime factor(N) routine n times to factor the input number into primes.

(c) Each call to the one prime factor(N) routine takes O(n^3) time (assuming it takes linear time to perform arithmetic operations on two n-digit binary numbers). Therefore, the worst-case time complexity of the algorithm is O(n^4).

(d) The time complexity of the algorithm is quite high, which means it may not be fast enough for large input sizes. In practice, there are faster algorithms for factoring integers, such as the general number field sieve (GNFS) or the quadratic sieve (QS), which have much lower time complexities. However, the one prime factor(N) routine may still be useful in certain situations where we only need to find one prime factor of a number.

To know more about algorithm visit:

brainly.com/question/21364358

#SPJ1

The correct option is b. False, as the given big-O bound is incorrect for multiplying two n-bit numbers.

The given big-O bound Q(n + 1) = 2(nº) is incorrect for multiplying two n-bit numbers. The correct big-O bound for this operation is Q(n log n), which is achievable by the Fast Fourier Transform algorithm.

The reason for this is that the number of multiplication operations required for multiplying two n-bit numbers is not exactly n^2, but rather n log n. Therefore, any algorithm that claims to achieve a better big-O bound than Q(n log n) for multiplying two n-bit numbers would be incorrect.

To know more about  big-O bound visit:

brainly.com/question/31627354

#SPJ11

The server core installation option in Windows Server 2012 R2 effectively removes the Graphical User Interface (GUI).

This option is ideal for servers that require a minimal footprint and where the administration of the server is done remotely via the command line interface or PowerShell.

There are two installation options for Windows Server 2012 R2: Server Core and Server with a GUI.

The Server with a GUI installation option includes the Graphical User Interface (GUI), which makes it easier for users to manage the server through a graphical interface.

However, the GUI requires more resources and has a larger attack surface than the Server Core installation option.

The Server Core installation option is a minimal installation option that removes the GUI and other features that are not required for server functionality.

In conclusion, the server core installation option in Windows Server 2012 R2 effectively removes the GUI and other unnecessary features to create a smaller attack surface and more efficient use of server resources.

To know more about Graphical User Interface, visit:

https://brainly.com/question/10247948

#SPJ11

The obscured line is most likely:

total = total + Cells(i, 1).Value

This line is adding the value of each cell in the range A1 to A100 to the variable "total".

The loop starts at 1 and goes to 100, and at each iteration, the value of the current cell in column A is added to the total.

The initial value of "total" is set to 0 at the beginning of the code.

Hence, the most likely obscured line is given as:

total = total + Cells(i, 1).Value

Read more about code snippets here:

https://brainly.com/question/23581477

#SPJ1

Answer:

P = 9.65 hp

Explanation:

Given that,

Speed of a car, v = 90 ft/s

Force that opposes the motion of the car, F = 59 pounds-force

90 ft/s = 27.432 m/s

1 pound-force = 4.448 N

59 pounds-force = 262.445 N

Power required is given by :

\(P=F\times v\\\\P=262.445\ N\times 27.432\ m/s\\\\P=7199.391\ W\)

Since, 1 hp = 745.7

7199.391 W = 9.65 hp

So, 9.65 hp of power is required to overcome the drag.

Answer:

Well there are a lot of delicious food in the philppines but my most favorite is the Lechon, Adobo, Sisig, Chicken Curry, Crispy pata and Sinigang

Answer:

minimum volume = 367.5 lit

minimum weight = 228.75 kg

Answer:

(T²/D³)sys1 = (T²/D³)sys2

sys1 = earth-moon

sys2 = earth-sat

(27.33day)²/(3.8e8m)³ = (1day)²/D³

D = cbrt(7.3e22m³) = 4.2e7 m

Explanation:

exchange in capacity whilst a satellite tv for pc differences altitude How plenty paintings could be executed to flow the satellite tv for pc into yet another around orbit it is bigger above the outdoors of the Earth? satellite tv for pc exchange in capacity with top Assuming the satellite tv for pc is to be boosted to a clean top r? Gravitational capacity capacity (to center of earth) new orbit(2) has a greater robust PE than old one(a million), so exchange is helpful PE = G m?m?/r earth GM = 3.98e14 ?PE = (GM)(m)(a million/r? – a million/r?) KE additionally differences. Get speed at each and every top. New orbit(2) has decrease speed, so exchange is damaging v = ?(GM/R) V? = ?(GM/r?) V? = ?(GM/r?) ?KE = –½m(V?² – V?²) ?KE = –½mGM(a million/r? – a million/r?) including the two ?E = (GM)(m)(a million/r? – a million/r?)– ½mGM(a million/r? – a million/r?) ?E = ½mGM(a million/r? – a million/r?) ?E = ½(3.98e14)(7500) [a million/(0.5e7) –a million/(3.3e7) ] ?E = ½(3.98e14)(7500)(1e-7) [a million/(0.5) –a million/(3.3) ] ?E = ½(3.98e7)(7500) [2 – 0.303 ] ?E = ½(3.98e7)(7500)(a million.70) ?E = 2.04e11 Joules edit, corrected .

The radius of a circular orbit will be "\(\frac{V}{2 \pi} \ km\)".

According to the question,

Time = 1 day

Distance = \(2 \pi r\)

Let,

As we know,

→ \(Distance = Velocity\times time\)

By substituting the values, we get

→          \(2 \pi r = V\times 1\)

→              \(r = \frac{V}{2 \pi} \ km\)

Thus the above is the right answer.

Learn more about radius of orbit here:

https://brainly.com/question/12859535

Answer:

Number of atoms will be "8 atoms/cell". The further explanation is given below.

Explanation:

The given values are:

a = 0.45258 nm

b = 0.45186 nm

c = 0.76570 nm

Atomic radius = 0.1218 nm

Density = 5.904 g/cm³

Atomic weight = 69.72 g/mol

Now,

The volume of unit cells will be:

⇒  \(V=a_{0}b_{0}c_{0}\)

On putting the estimated values, we get

⇒      \(=0.45258\times 0.45186\times 0.76570\)

⇒      \(=0.1566 \ nm^3\)

⇒      \(=1.56\times 10^{-22} \ cm^3\)

(a)...

From equation of density we get,

⇒  \(Density=\frac{(x \ atoms/cell)(Atomic weight)}{(Volume)(6.02\times 10^{23} \ atoms/mol)}\)

⇒  \(5.904=\frac{x\times 69.72}{(1.566\times 10^{-22})(6.02\times 10^{23})}\)

⇒        \(x=8 \ atoms/cell\)

(b)...

From equation of PF we get,

⇒  \(PF=\frac{(3 \ atoms/cell)(\frac{411}{3} )(0.1218)}{0.1566}\)

⇒         \(= 0.387\)

The number of atoms in each unit cell and the packing factor in the unit cell are;

a) Number of atoms in each unit cell = 8 atoms

b) Atomic packing factor = 0.3876

We are given;

a = 0.45258 nm ≈ 0.45258 × 10^(-7) cm

b = 0.45186 nm = 0.45186 × 10^(-7) cm

c = 0.76570 nm = 0.7657 × 10^(-7) cm

Atomic radius; r = 0.1218 nm = 0.1218 × 10^(-7)

density; ρ = 5.904 g/cm³

Atomic weight = 69.72 g/mol

Avogadro's number = 6.02 × 10²³ atom/mol

a) The number of atoms per cell is calculated by clearing it from the equation;

Number of atoms/cell = (ρ × cell volume × Avogadro number)/atomic weight

Where;

cell volume = a × b × c

Cell volume = 0.45258 × 10^(-7) × 0.45186 × 10^(-7) × 0.7657 × 10^(-7)

Cell volume = 1.5659 × 10¯²² cm³

Thus;

Number of atoms per cell = (5.904 × 1.5659 × 10¯²² × 6.02 × 10²³)/69.72

Number of atoms per cell = 7.9 atoms

Number of atoms per cell = 8 atoms

b Formula for the packing factor is calculated from the formula:

FE = (number of atoms per cell x atom volume)/cell volume

Formula for atom volume is;

Atom volume = 4πr³/3

Atom volume = (4π × 0.1218 × 10^(-7))³/3

Atom volume = 7.5875 × 10¯²⁴ cm³

Thus;

FE = (8 x 7.5875 x 10¯²⁴)/(1.5659¯²²)

FE = 0.3876

Read more about atomic packing factor at; https://brainly.com/question/6610542

The distance between structural supports such as walls, columns, piers, beams, or girders

Span – The distance between structural supports such as walls, columns, ports, girders, and trusses.

A joist is a horizontal structural component used in framing to span an open space, often between beams that subsequently move loads to vertical members. When incorporated into a floor framing system, joists serve to provide immobility to the subfloor sheathing, permitting it to function as a horizontal diaphragm.

To learn more about structural supports, refer

https://brainly.com/question/1145299

#SPJ9

Answer:

yes it is

Explanation:

but your Question is useless

Answer:

yall chill

Explanation:

In hybrid vehicles, the high-voltage (HV) battery pack is typically located in the rear of the vehicle or under the rear seats.

Explanation: The HV battery pack in hybrid vehicles is a key component that stores electrical energy used to power the electric motor or assist the internal combustion engine. Its location in the vehicle is strategically chosen to optimize weight distribution, maximize interior space, and ensure safety.

In many hybrid models, the HV battery pack is positioned in the rear of the vehicle. Placing it in the rear helps to balance the weight distribution between the front and rear axles, improving stability and handling. This location also allows for better utilization of the available space, as the rear of the vehicle is often less occupied compared to the engine compartment or passenger cabin.

In some hybrid vehicles, the HV battery pack may be located under the rear seats. This placement provides additional benefits such as minimizing intrusion into the cargo area, maintaining a low center of gravity for improved stability, and allowing for easy access for maintenance or replacement.

Overall, the specific placement of the HV battery pack may vary depending on the vehicle model and manufacturer's design choices. However, the rear of the vehicle or under the rear seats are common locations chosen for the HV battery pack in hybrid vehicles.

Learn more about high-voltage (HV) battery pack here:

https://brainly.com/question/19595664

#SPJ11

Answer: Most master’s degree programs will take an average of two years from start to finish – about half of the time it takes to earn your bachelor’s degree. While bachelor’s degree programs involve many introductory and general education courses, a master’s degree curriculum is all about the subject area you selected to study.

Explanation: Hope this was helpful

Answer:

Conic Sections

a conic section is a curve which is obtained when a surface performs an intersection with a plane. The types of conic sections include hyperbola, parabola and ellipse. A circle can also be considered as a conic section.

Conic Solids on the other hand are the set of points on any segment between a region and a point which is not present in the plane of the base. They are solids with one base.

Answer:

BFS uses Queue to find the shortest path. DFS uses Stack to find the shortest path. ... Time Complexity of BFS = O(V+E) where V is vertices and E is edges. Time Complexity of DFS is also O(V+E) where V is vertices and E is edges.

Explanation:

Electrical Engineering Textbooks: These textbooks provide comprehensive information on conductor applications and insulation types. They cover topics such as conductor materials, their properties, and various insulation materials used in different applications.

Online Resources: There are several websites dedicated to electrical engineering and related topics that offer information on conductor applications and insulation types. Some reliable sources include IEEE (Institute of Electrical and Electronics Engineers) Xplore, Electrical Engineering Stack Exchange, and All About Circuits. These platforms have forums, articles, and technical papers discussing conductor applications and insulation types.Manufacturers' Websites: Electrical component manufacturers often provide detailed information on conductor applications and insulation types.

For example, companies like General Cable, Southwire, and Prysmian Group have websites that describe their product offerings, including conductor applications and insulation types. You can explore their product catalogs or technical specifications for more specific details.Industry Standards and Codes: Various industry standards and codes outline conductor applications and insulation types. The National Electrical Code (NEC) and the International Electrotechnical Commission (IEC) standards are widely followed in electrical engineering. These standards often provide guidelines and requirements for conductor selection and insulation materials based on the intended application.Remember, it's essential to cross-reference information from multiple sources to ensure accuracy and a comprehensive understanding.

To know more about Electrical Engineering visit:

https://brainly.com/question/31327406

#SPJ11

a. Versatility b. Attractiveness c. Sustainability

d. Affordability

Versatility is the capacity to adapt to different situations or contexts. It involves having the ability to adjust to changing environments and being able to handle different tasks with ease. Versatility can also be seen in the use of multiple skills, such as being able to switch between different roles or activities as needed. It is an important quality in any job and can be beneficial in many aspects of life. Having versatility can help one to become more flexible and resilient in an ever-changing world.

To learn more about capacity

https://brainly.com/question/29620221

#SPJ4

The regular expression for binary numbers of length four is: ^(0|1){4}$

A regular expression is a sequence of characters that defines a search pattern. In this case, we need to write a regular expression to match binary numbers of length four.

Breaking down the regular expression:

- ^ denotes the start of the string.

- (0|1) matches either a 0 or a 1.

- {4} specifies that the previous group (0|1) should be repeated exactly four times.

- $ denotes the end of the string.

Combining these elements, the regular expression ^(0|1){4}$ ensures that the entire string consists of only four binary digits (0 or 1), with no additional characters before or after.

Learn more about regular expression

brainly.com/question/32344816

#SPJ11

The Pitot tube measures air velocity directly by means of a pressure transducer which generates an electrical signal which is proportional to the difference between the pressure generated by the total pressure and the still air (static pressure).

Fluid flow velocity is measured using a pitot tube (pitot probe; /pito/ PEE-toh). It was developed in the early 18th century by a French engineer named Henri Pitot. and changed into its current form by a French scientist named Henry Darcy in the middle of the 19th century. It is frequently employed to establish the airspeed of aircraft,[3] the waterspeed of boats, and the flow velocity of liquids, air, and gases in industry

P0 = P2 + 12 V2z = 8.77 x 104 + 12 (1.23)(147)2 = 1.01 x 103 N/m2 p1 - P2 = w H = 1.33 x 104 N/m2 (1.33 x 105)(0.1) = 1.33 x 104 N/m2 p2 = P1 - P1 - 1.33 x 104 = 1.01 x 105

Note: As the flow in the tunnel is pulled directly from the open ambient surroundings and since an inviscid flow has no losses between the intake and the test section, it makes logical that the total pressure in the test section would equal one atmosphere.

learn more about pitot tube here:

https://brainly.com/question/14868857

#SPJ1

Focus primarily on highly precise specifics of what Cornell offers and how it matches with your interests and values. You can regard this as a "Why us?" essay with some optional "Why major" spice.

To learn more about essay refer :

https://brainly.com/question/94727

#SPJ4

Answer:

. What's an object in your everyday life that has a lot of Kinetic Energy? How do you know it has a lot?

"Something that has a lot of Kinetic Energy is a plane and a baseball . I know this because the baseball gets energy to it when its thrown which is giving in kinetic energy".

2.What's an object in your everyday life that has a lot of Potential Energy? How do you know it has a lot? "an object that has a lot of potential energy is Water that is behind a dam. A car that is parked at the top of a hill. A yoyo before it is released. I know this because

the energy possessed by a body by virtue of its position relative to others, stresses within itself, electric charge, and other factors."

For independent control of the engineer's mix and the musician's mix, headphone sends should be split. Headphone sends should be split if there is a need for independent control of the engineer's mix and the musician's mix.

When the headphone sends are split, it means that different audio signals are being sent to each musician. As a result, each musician has control over their mix, and the engineer has control over the final mix.

The headphone sends can be split in a variety of ways. There are dedicated headphone mixers available on the market, which can provide separate mixes to each musician. Alternatively, individual mixer sends can be used to create separate headphone mixes.

This can be achieved by assigning each musician a mixer send, which is then used to send a unique mix to each musician's headphones. In conclusion, headphone sends should be split if there is a need for independent control of the engineer's mix and the musician's mix. This can be accomplished using dedicated headphone mixers or individual mixer sends.

To know more about engineer's visit:

https://brainly.com/question/31140236

#SPJ11