is this right or wrong ? pls help rn

Answer:

it is the unit of Force

Explanation:

force is equal to Newton

The total mass of the balloon and its content is 1521.17 g, the number of moles of CO₂ in the balloon is 34.15 mol, and the number of CO₂ molecules in the balloon is 2.06 x 10²⁵ molecules.

a) The molar mass of CO₂ is 44.01 g/mol. To find the total mass of the balloon and its content, we need to add the mass of the balloon (20g) to the mass of the CO₂ inside the balloon.

Mass of CO₂ = number of moles of CO₂ x molar mass of CO₂

Since the balloon is at STP (standard temperature and pressure), we can use the molar volume of a gas at STP (22.4 L/mol) to find the number of moles of CO₂ in the balloon:

Volume of CO₂ = Volume of balloon = 765 L (at STP)

Number of moles of CO₂ = volume of CO₂ / molar volume of a gas at STP

                                          = 765 L / 22.4 L/mol

                                          = 34.15 mol

Mass of CO₂ = 34.15 mol x 44.01 g/mol

                       = 1501.17 g

Total mass of balloon and its content = 20 g + 1501.17 g

                                                               = 1521.17 g

b) Number of moles of CO₂ in the balloon is 34.15 mol

c) To find the number of CO₂ molecules in the balloon, we need to use Avogadro's number (6.02 x 10²³ molecules/mol).

Number of CO₂ molecules = number of moles of CO₂ x Avogadro's number

                                           = 34.15 mol x 6.02 x 10²³ molecules/mol

                                           = 2.06 x 10²⁵ molecules

To know more about the Mass, here

https://brainly.com/question/22104139

#SPJ1

The event described when wind blows up the windward side, sand grains may be picked up and blown toward the top is  Dune movement.

The sand mass of dunes can move either windward or leeward, depending on if the wind is making contact with the dune from below or above its apogee.

If wind hits from above, the sand particles move leeward; the leeward flux of sand is greater than the windward flux.

Thus, the event described when wind blows up the windward side, sand grains may be picked up and blown toward the top is  Dune movement.

Learn more about dune movement here: https://brainly.com/question/13027240

#SPJ1

Answer: 2.31 L

Explanation:

charles law  v2= V1 x T2/T1

temperature must be in Kelvin

V2=2.5 X 298.15 / 323.15 =2.31 L

The word "symptom" refers to a specific manifestation or indication of a condition, disease, or disorder that is experienced or observed by an individual.

Symptoms are subjective or objective changes in the body's normal functioning that may be recognized as abnormal, uncomfortable, or problematic. Symptoms can manifest in various ways depending on the nature of the underlying condition. They can be physical, such as pain, rash, cough, fever, or fatigue, indicating an illness or injury affecting the body. Symptoms can also be psychological, such as anxiety, depression, or confusion, reflecting disturbances in mental health.

Symptoms serve as important clues for medical professionals to identify and diagnose diseases or disorders. They provide valuable information about the nature, severity, and progression of an illness, helping healthcare providers formulate appropriate treatment plans. Additionally, symptoms may also be important for individuals to self-assess their own health status and seek appropriate medical attention.

It is essential to note that symptoms alone may not provide a definitive diagnosis, as they can overlap across different conditions. Further evaluation, including medical tests and examinations, is often necessary to confirm a diagnosis and determine the appropriate course of action.

for more such questions on symptom

https://brainly.com/question/21078887

#SPJ8

The new volume of the balloon after heating it to a temperature of 51 °C is approximately 2.39 L.

Charles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.

It is expressed as;

\(\frac{V_1}{T_1} =\frac{V_2}{T_2}\)

Given that:

Substituting the given values and solve for V₂:

\(V_1T_2 = V_2T_1\\\\V_2 = \frac{V_1T_2}{T_1} \\\\V_2 = \frac{2.2\ *\ 324.15}{298.15 }\\ \\V_2 = 2.39 \ L\)

Therefore, the final volume is 2.39 litres.

Learn more about Charles's law here: https://brainly.com/question/23122443

#SPJ1

Answer:

The solubility of alkaline earth metal hydroxides in water increases down the group because the size of the metal cation increases as you move down the group. This increase in size results in a decrease in the cation's charge density, which makes it less able to attract and hold onto hydroxide ions. As a result, the hydroxides become more soluble in water as you move down the group. Additionally, the lattice energies of the hydroxides decrease down the group, making it easier to break apart the crystal lattice structure and dissolve the hydroxides in water.

26.71 g mass of tin would be required to completely react with 1.20 L of 0.750 M HBr.

What is mass ?

Mass is a measure of the amount of matter in an object or substance. It is often expressed in units of grams (g) or kilograms (kg). Mass is a fundamental property of matter and is different from weight, which is the force exerted on an object by gravity and varies depending on the object's location. Mass can be measured using a balance or scale, and is an important factor in many chemical calculations and experiments, such as determining the amount of reactants needed for a reaction or the concentration of a solution.

First, we need to determine the number of moles of HBr in the solution:

moles of HBr = Molarity x Volume

moles of HBr = 0.750 mol/L x 1.20 L

moles of HBr = 0.900 mol

According to the balanced chemical equation, 1 mole of Sn reacts with 4 moles of HBr to produce 1 mole of SnBr₄. Therefore, the number of moles of Sn required can be calculated as:

moles of Sn = (moles of HBr) / 4

moles of Sn = 0.900 mol / 4

moles of Sn = 0.225 mol

The molar mass of Sn is 118.71 g/mol, so the mass of Sn required can be calculated as:

mass of Sn = moles of Sn x molar mass of Sn

mass of Sn = 0.225 mol x 118.71 g/mol

mass of Sn = 26.71 g

Therefore, 26.71 g of tin would be required to completely react with 1.20 L of 0.750 M HBr.

To know more about molarity, visit:

https://brainly.com/question/8732513

#SPJ1

Complete question is:  26.71 g mass in grams of tin would be required to completely react with 1.20 L of 0.750 M HBr in the chemical reaction. Sn(s) + 4 HBr(aq) → SnBr₄ (aq) + 2 H₂ (g)

Nuclear fission causes a neutron to split the isotope U-235 when it collides with its nucleus. When a slow neutron interacts with a heavy nuclide like 235U, nuclear fission can occur (0.025 eV).

When a slow neutron interacts with a heavy nuclide like 235U, nuclear fission can occur (0.025 eV). If a fission (or splitting apart) occurs, the nuclear material splits into two (on average) about equal fragments that travel away with kinetic energy, producing heat.

Nuclear fission causes a neutron to split the isotope U-235 when it collides with its nucleus. Two or three additional neutrons as well as fission products are released during this fission process. The chain reaction is continued by some of the emitted neutrons. There is significant energy released in every fission reaction.

When a uranium atom divides, additional neutrons are also released. The process keeps repeating again as these neutrons keep crashing into more uranium atoms. This process is called a nuclear chain reaction. This reaction is controlled in nuclear power plant reactors to produce a desired amount of heat.

To learn more about nuclear fission refer to:

https://brainly.com/question/3992688

#SPJ13

(a)  The mass percent of HCl in the solution is approximately 36.1%.

(b)  The molality of HCl in the solution is approximately 15.5 mol/kg.

(c)  The mole fraction of HCl in the solution is approximately 0.218.

(a) To calculate the mass percent of HCl, we need to determine the mass of HCl in a given volume of the solution.

Given: Concentration of HCl = 11.8 M

Density of the solution = 1.190 g/mL

First, we need to calculate the mass of the solution. Since density is mass per unit volume, the mass of 1 mL of the solution is 1.190 g.

Next, we need to calculate the mass of HCl in 1 mL of the solution. Since the concentration is given in moles per liter (M), and the molar mass of HCl is 36.46 g/mol, we can calculate the mass of HCl in 1 mL as follows:

Mass of HCl = concentration × volume × molar mass

          = 11.8 mol/L × 0.001 L × 36.46 g/mol

          = 0.430 g

Now, we can calculate the mass percent of HCl using the following formula:

Mass percent = (mass of solute ÷ mass of solution) × 100

           = (0.430 g ÷ 1.190 g) × 100

           ≈ 36.1%

(b) The molality of HCl is calculated by dividing the moles of solute (HCl) by the mass of the solvent (water) in kilograms.

Since the density of the solution is given as 1.190 g/mL, the mass of 1 mL of the solution is 1.190 g. However, we need to consider the density of the solvent (water) to calculate the mass of water in the solution.

Assuming the density of water is 1 g/mL, the mass of water in 1 mL of the solution is (1.190 g - 0.430 g) = 0.760 g.

To calculate the molality of HCl, we need to convert the mass of water to kilograms:

Mass of water (kg) = 0.760 g ÷ 1000 = 0.000760 kg

The molality (m) is calculated using the formula:

Molality = (moles of solute ÷ mass of solvent in kg)

        = (11.8 mol/L × 0.001 L) ÷ 0.000760 kg

        ≈ 15.5 mol/kg

(c) The mole fraction (X) of HCl is calculated by dividing the moles of HCl by the total moles of all components in the solution.

To calculate the mole fraction, we need to consider the volume of the solution and convert it to liters.

Given: Concentration of HCl = 11.8 M

Volume of the solution = 1 mL

Volume of the solution (L) = 1 mL ÷ 1000 = 0.001 L

To calculate the mole fraction of HCl, we need to calculate the moles of HCl and the moles of water (solvent) in the solution.

Moles of HCl = concentration × volume

            = 11.8 mol/L × 0.001 L

            = 0.0118 mol

Moles of water = mass of water ÷ molar mass of water

             = 0.760 g ÷ 18.015 g/mol (molar mass of water)

             = 0.0422 mol

Total moles in the solution = moles of HCl + moles of water

                           = 0.0118 mol + 0.0422 mol

                           = 0.054 mol

Mole fraction of HCl = moles of HCl ÷ total moles

                   = 0.0118 mol ÷ 0.054 mol

                   ≈ 0.218

For such more questions on molality

https://brainly.com/question/14366957

#SPJ8

The molarity is an important method which is used to determine the concentration of a solution. So the term molarity is also known as the concentration. Here the grams of Kr which occupies a volume of 42.6 mL is

The molarity of a solution is defined as the number of moles of the solute present per litre of the solution. Its unit is mol L⁻¹ and it is essential to calculate the concentration of a binary solution.

Here M₁V₁ = M₂V₂

M₂ = M₁V₁ /  V₂

25.7 mL = 0.0257 L

42.6 mL = 0.0426 L

M₂ =  5.10 × 0.0257 / 0.0426  = 3.076 g

To know more about molarity, visit;

https://brainly.com/question/16727614

#SPJ1

Answer:

For numerical purposes however, we can assume that each nitrogen is in +1 and overall oxidation... The oxidation of nitrogen in NH4+ is -3. The hydrogen atoms have +1 and there are four of them. And net charge on the molecule is +1.

Explanation:

Explanation:

it is negative acceleration

Answer:

negative acceleration

Explanation:

Answer:

The Plum Pudding model could not explain the results of the gold foil experiment conducted by Rutherford.

Explanation:

According to the Plum Pudding model, there is no empty space in the atom. However, Rutherford's experiment showed that there is empty space in an atom.

Additionally, according to the Plum Pudding model, there is no scope for the nucleus. However, Rutherford's experiment also showed that there is a dense positively charged area in the center of the atom, which was the nucleus.

The qualities Tom Walker and his wife have in common were they both were grasping and without conscience

The question has been asked from the story "The Devil and Tom Walker" by Washington Irving. As the story describes Tom's encounter with the devil, he is a complex character. However, he and his wife seem to complement each other well and have some personality traits in common. Tom and his wife are both miserly, avaricious, cruel, and morally void.

More so than her husband, Tom's stereotypically nagging, scolding wife verbally and perhaps even physically abuses him when she's not hoarding his valuables. Tom's wife courageously decides to accept Old Scratch's offer to sell her husband's soul for money when Tom first rejects it. She takes the family's silver into the swamp with her so she may haggle with the devil.

Read more about Tom Walker on:

https://brainly.com/question/30492871

#SPJ1

Considering the phase diagram, the state of matter that exists in area B is gas.

The correct option is A.

A phase diagram is a graphical representation that shows the conditions of temperature and pressure at which different phases or states of a substance exist.

The axes of a phase diagram typically represent temperature (usually on the horizontal axis) and pressure (usually on the vertical axis). The diagram is divided into regions that correspond to different phases, and the lines separating these regions represent phase boundaries.

The point where three phase boundaries meet is known as the triple point, which represents the temperature and pressure at which all three phases can coexist in equilibrium.

Learn more about phase diagrams at: https://brainly.com/question/28097253

#SPJ1

C and O since their electronegativity differs by quite a lot

The mass of the asteroid is C. 1.2 x \(10^{12}\) Kg

To find the mass of the other asteroid, we can rearrange the equation for the gravitational force between two objects:

F = (G * m1 * m2) / \(r^{2}\)

where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two asteroids, and r is the distance between them.

Given that the distance between the asteroids is 75000 m, the force of gravity between them is 1.14 N, and one asteroid has a mass of 8 x \(10^{7}\) kg, we can substitute these values into the equation and solve for the mass of the other asteroid (m2):

1.14 N = (6.67430 × \(10^{-11}\) N \(m^{2}\)/\(Kg^{2}\) * 8 x \(10^{7}\) kg * \(m2\)) / \((75000 m)^{2}\)

Simplifying and solving the equation, we find that the mass of the other asteroid (m2) is approximately 1.2 x \(10^{12}\) kg. Therefore, Option C is correct.

The question was incomplete. find the full content below:

Two asteroids are 75000 m apart one has a mass of 8 x \(10^{7}\) kg if the force of gravity between them is 1.14 what is the mass of the asteroid

A. 3.4 x \(10^{11}\) kg

B. 8.3 x \(10^{12}\) kg

C. 1.2 x \(10^{12}\) kg

D. 1.2 x \(10^{10}\) kg

Know more about gravitational force here:
https://brainly.com/question/72250

#SPJ8

2.65g/ml is the density of a piece of granite whose volume is 20 mL and mass is 53grams. Density is the mass of a specific material per unit volume.

Density is the mass of a specific material per unit volume. Density is defined as d = M/V, in which d represents density, M is weight, as well as V is volume. Density is generally expressed in grams every cubic centimetre. Water, for example, has a density of 1 gram per square centimeter, but Earth has a density of 5.51 kilograms per cubic centimetre.

Density is sometimes measured in kilos per cubic centimeter (in metre-kilogram-second or SI units). The density of air, for example, is 1.2 kilos per cubic metre. 

density = mass / volume

            =53/ 20

            =2.65g/ml

Therefore, 2.65g/ml is the density of a piece of granite whose volume is 20 mL and mass is 53grams.

To learn more about density, here:

https://brainly.com/question/13434141

#SPJ1

Answer:

I'm sorry I couldn't find it, I looked all over the internet

Answer:

What are the compounds

Explanation:

Answer:

Where is the picture?

Explanation:

Answer:

yes

Explanation:

Answer:

yes

Explanation:

Humans inhale oxygen and breath out carbon dioxide.

The elements  are in the unknown sample of emission spectrums is lithium and potassium.

When light is emitted through a chemical material, it is known as an emission spectrum. An emission spectrum is a development of many types of lines in a variety of colors and wavelengths.

The red line emits light with the longest wavelength, which may be easily measured using a spectrophotometer when light passes through it.

Lithium and potassium are hence elements in the unidentified emission spectrum sample. B and E are the proper answers.

Learn more about emission spectrum, here:

brainly.com/question/12472637

#SPJ1

Missing parts:

The emission spectrums are known for the elements below. Line spectra for boron, lithium, hydrogen, helium, potassium and unknown sample. Boron has 3 purple lines, 1 blue line, 2 blue-green lines and 2 orange lines. Lithium has 2 purple lines, 2 blue lines, 2 blue-green lines, 1 orange line and 1 red line. hydrogen has one line of each purple, blue, blue-green and red. helium has 3 purple lines, 3 blue lines, 3 blue-green lines 1 yellow line and 2 red lines. Potassium has 8 purple lines, 6 blue-green lines, 10 green lines, 3 yellow lines, 2 orange lines and 6 red lines. The unknown sample has Potassium has 8 purple lines, 6 blue-green lines, 10 green lines, 3 yellow lines, 2 orange lines and 6 red lines. What elements are in the unknown sample? Check all that apply. boron lithium hydrogen helium potassium

Answer : The molecular formula of the compound is, \(C_8H_9O_3N\)

Explanation :

Molecular formula : It is the representation of substance by the symbols and it denotes the number of atoms of each element present in the compound.

Now count the number of carbon, hydrogen, nitrogen and oxygen atoms present in the given compound.

As we see that in the given compound, there are 8 atoms of carbon element, 3 atoms of oxygen element, 1 atom of nitrogen element, 9 atoms of hydrogen element.

Thus, the molecular formula of the compound will be \(C_8H_9O_3N\)

Answer:

Explanation:

Propionic acid  has chemical formula of  C₃H₆O₂ , and smells somewhat unpleasant (like body odour).

Answer:

thermal and motion energy

Explanation:

The name of the three compounds are Disulfur Dichloride, Potassium nitrate and Ammonium bromide respectively.

1. The name of the first compound is Disulfur Dichloride.

Disulfur Dichloride is a type of inorganic compound comprise of sulfur and chlorine. There are also many other names which we can be used like sulfur monochloride, disulphur dichloride and sulphur monochloride. It is used to show C-S bonds.

2. The name of the second compound is Potassium nitrate.

Potassium nitrate is a compound that belong to the alkali metal nitrate. Potassium nitrate is also known as Indian saltpetre. The potassium nitrate is present in the nature but in the form of mineral. The potassium nitrate is used for making the explosives, matches, rocket fuel and fireworks.

3.The name of the third compound is Ammonium bromide.

Ammonium bromide is a type of compound that contains ammonium salt of hydrobromic acid. It can melt easy on providing heat. It is also soluble in water. It gives yellow colour. Ammonium bromide is the weak acid.

So we can conclude that the name of the three compounds are Disulfur Dichloride, Potassium nitrate and Ammonium bromide respectively.

Learn more about Potassium Nitrate here: https://brainly.com/question/16419109

#SPJ1

Answer:

yeah why?

Explanation:

Answer:

An acid is any hydrogen-containing substance that is capable of donating a proton (hydrogen ion) to another substance. A base is a molecule or ion able to accept a hydrogen ion from an acid.

Answer:

1.Sour in taste

2. Tum blue litmus into red

3. Acids change methyl orange to red

4.Phenolphthalein remains colourless

5. Acids do not give soapy touch

6. Give hydrogen ions in solution

Bitter in taste