Is the practice of accessing computer systems in an unauthorized way. means to accomplish other traditional criminal activities?

Answer:

(a) Difference in data transfer rates

(b) Difference in word lengths

(c) Different peripherals with different modes of operation

Explanation:

There are several reasons. Some of them have been listed in the explanation section. A brief explanation is as follows

(a) Difference in data transfer rates

Some peripherals have fast transfer rate while some have slow transfer rates compared to the processor they are being connected to. This difference in the rates implies that a high speed system bus will find it difficult to communicate with a (say) low speed peripheral.

(b) Difference in word lengths

Another consideration is the word lengths. Often times, peripherals and the bus they are being connected with will have a different word lengths.

(c) Different peripherals with different modes of operation

In computer architecture, a processor can not be used to interact with peripheral of different mode of operations. In other word, each peripheral have its own mode and will require different means of connection.

Answer:

B

Explanation:

24 bits is an initialization vector (IV) which is used by most weak implementations of the Wireless Equivalency Protocol (WEP).

Wireless Equivalency Protocol (WEP) can be defined as a standard wireless protocol that is designed and developed to provide a significant level of security and privacy on 802.11b wireless local area network (WLAN).

According to the IEEE Wireless Fidelity (Wi-Fi) standard, 24 bits is an initialization vector (IV) which is used by most weak implementations of the Wireless Equivalency Protocol (WEP).

Read more on Wireless Equivalency Protocol here: https://brainly.com/question/13697151

#SPJ1

Answer:

Could you please explain more

Explanation:

Answer:

Am sorry but I can't see the two parts

To construct a voltage divider using Multisim, follow these steps: select appropriate resistors, connect them in series, connect the input voltage to the resistor junction, and measure the output voltage across one of the resistors.

To construct a voltage divider using Multisim, you need to select resistors with appropriate values. The resistor values will determine the voltage division ratio.

Start by opening Multisim and selecting the resistors you want to use from the component library. Make sure to choose resistors with values that match your desired voltage division ratio.

Connect the resistors in series by placing them next to each other on the workspace. The output of one resistor should be connected to the input of the next resistor, forming a chain.

Connect the input voltage to the junction of the resistors. This is where you will measure the output voltage.

Finally, use a voltmeter or a virtual instrument in Multisim to measure the output voltage across one of the resistors.

By following these steps and properly configuring the resistor values, you can construct a voltage divider in Multisim. The output voltage will be determined by the ratio of the resistor values and the input voltage. Adjusting the resistor values will allow you to achieve different voltage division ratios and tailor the output voltage according to your requirements.

Learn more about resistors  here :

https://brainly.com/question/30672175

#SPJ11

The primary problem with Prezi and similar presentation programs is the potential for excessive and distracting visual effects.

While these tools offer dynamic and non-linear presentation capabilities, they can easily be misused, leading to overwhelming and disorienting visuals. If not used carefully, the zooming and panning transitions in Prezi can cause motion sickness or detract from the content being presented. Another concern is the lack of standardization and familiarity among users, as Prezi's unique interface and navigation may require additional time for audiences to adjust and understand. Additionally, the emphasis on visual effects may overshadow the importance of clear and concise communication, leading to a loss of focus and effectiveness in conveying the intended message.

Learn more about Prezi here;

https://brainly.com/question/2094190

#SPJ11

Answer:

Amazon's Global Month of Volunteering includes hundreds of partners. Tens of thousands of employees around the world are coming together to support over 400 organizations in their local communities.

Answer:

if the code is like this, theres an indent on the print(sum)

c = 1

sum = 0

while (c < 10):

   c = c + 2

   sum = sum + c

   print (sum)

the output would be:

3

8

15

24

35

or

if the code look like this, it has no indent on print(sum)

c = 1

sum = 0

while (c < 10):

   c = c + 2

   sum = sum + c

print (sum)

the output would be:

35

Yes, an error message will eventually be generated if two internet routers keep sending their packets back and forth to each other. The error message will be generated by one of the routers, and it will indicate that there is a routing loop.

Routing loops occur when packets are continuously forwarded between routers in a network, creating an infinite loop. This causes the network to become congested and can lead to degraded network performance or even a complete network outage.

When a router detects a routing loop, it will generate an error message and send it to the network administrator or the router responsible for the loop. The error message might look something like this:

"Routing loop detected between Router A and Router B. The routing table on Router A indicates that the next hop for destination X is Router B, while the routing table on Router B indicates that the next hop for destination X is Router A. Please check your network configuration to resolve this issue."

The exact wording of the error message may vary depending on the router and the network configuration.

However, the message will typically indicate the routers involved in the routing loop and provide guidance on how to resolve the issue, which may involve reconfiguring the routers' routing tables or changing the network topology.

Learn more about error message:

https://brainly.com/question/30062195

#SPJ11

This prompt requires 4 different algorithms. See the algorithms given below.

An algorithm is a step-by-step technique that outlines a series of instructions that must be followed in a precise order in order to generate the intended outcome.

Input two numbers a and b

Set sum = a + b

Set p = a * b

Set difference = a - b

Output sum, p, and difference

The Flow chart is as follows;

start

   -> input a

   -> input b

   -> sum = a + b

   -> p = a * b

   -> difference = a - b

   -> output sum, p, and difference

end

2. To find the greater number among two inputs, you can use the following algorithm:

Input two numbers a and b

If a is greater than b

   Set greaterNumber = a

Else

   Set greaterNumber = b

Output greaterNumber

The flow chart is as follows:

Input two numbers a and b

|

V

Is a greater than b?

|

V

No--------Yes

|          |

V          V

Set greaterNumber = b     Set greaterNumber = a

|

V

Output greaterNumber

3. To print the odd numbers from 1 to 21 and find their sum, you can use the following algorithm:

Set sum = 0

For i = 1 to 21

   If i is odd

       Print i

       Set sum = sum + i

Output sum

Here is the flowchart for the above:

Start

Set sum = 0

For i = 1 to 21

   If i is odd

       Print i

       Set sum = sum + i

   End If

End For

Output sum

End

4. To print the odd numbers from 1 to 99 and find their sum, you can use the following algorithm:

Set sum = 0

For i = 1 to 99

   If i is odd

       Print i

       Set sum = sum + i

Output sum

┌───────────┐

│ Set sum = 0│

└──────┬────┘

      │

      ▼

┌───────────┐

│  Set i = 1│

└──────┬────┘

      │

      ▼

┌───────────┐

│ if i is odd│

│ Print i   │

│ Set sum = │

│ sum + i   │

└──────┬────┘

      │

      ▼

┌───────────┐

│   Set i = │

│ i + 1     │

└──────┬────┘

      │

      ▼

┌───────────┐

│if i <= 99 │

└──────┬────┘

      │

      ▼

┌───────────┐

│ Output sum│

└───────────┘

Learn more about algorithms:
https://brainly.com/question/28724722
#SPJ1

Changing the font size.

HTML you use to 'mark up' plain text. It tells the text what its purpose should be : an unordered / ordered list, a paragraph etc.

CSS is for formatting that marked up content.  With CSS, you can control the colour, font, the size of text, the spacing between elements, how elements are positioned and laid out, what background colours are to be used, different displays for different devices and screen sizes and more.

Think of HTML as the abstract text and images behind a web page and CSS as the page that actually gets displayed.

Answer:

I think the three and four

Explanation:

tools, machinery, and other durable equipment.

The security advantage in this situation that justifies the extra expense is that these Biometric devices is one that separates the handling of issues regarding biometric information from the system operating system.

An biometric authentication is known to be a device that is used to handle access in regards to physical and digital resources, e.g. buildings, rooms and other forms of computing devices.

Note that the security advantage in this situation that justifies the extra expense is that these Biometric devices is one that separates the handling of issues regarding biometric information from the system operating system.

Learn more about Biometric devices from

https://brainly.com/question/19096951

#SPJ1

A time quantum for CPU scheduling algorithms is the absolute minimum time that a process can run.

It is the amount of time a process is allowed to run in the CPU before it is preempted and another process is chosen to run. The quantum is typically a fixed amount of time; when the quantum elapses, the process is moved out of the CPU in order to allow another process to run.

The quantum should be short enough so that the processes are not too long running, but long enough so that the process has a fair chance to finish its work. Generally, the smaller the time quantum, the greater the system's overhead in terms of scheduling and context switching, but the better the system's responsiveness.

Learn more about scheduling algorithms here:

https://brainly.com/question/26639214

#SPJ11

Answer:

it says page does not exist

Explanation:

Answer:

Shortened versions of phrases Ex:(l ol, s mh, i dk, ect.)

Explanation:

Hope that this helps, if you have any more question please feel free to contact me, hope you have an amazing rest of your day. ;D

Answer:

That will be Throwaway

Answer:

1. In the context of systems development, which of the following most closely matches the definition of a requirement?

(A)the guidelines to be met in the design of a system

2. Which of the following situations demonstrates a weakness of the systems development life cycle (SDLC)?

(D)The client decides he or she wants to change the purpose of the project.

3. Which of the following is the worst reason to upgrade the operating system on your company’s computers?

(D)The new operating system is able to play modern games, so employees will have some leisure time.

4. Your team has almost completed work on developing a system designed to track inventory at grocery store. The client then sends an e-mail asking if the system can also track employee work hours. This challenge is an example of

(C)requirements creep

5. Which of the following is a disadvantage of outsourcing?

(C)The contracting company may not be able to perform the task.

6. Which of the following accurately portrays the correct sequence for the five phases in the Systems Development Life Cycle (SDLC)?

(B)planning; analysis; design; implementation; maintenance

7. Which of the following situations demonstrates a strength of the Systems Development Life Cycle (SDLC)?

(D)The process set up by the team allows for lots of flexibility.

8. During which phase of the Systems Development Life Cycle is the feasibility study conducted?

(D)planning

9. Which of the following happens during the implementation phase of the Systems Development Life Cycle (SDLC)?

(B)Convert data to be compatible with the new system.

10. After defining the scope of the system, the next step is to...

(C)determine requirements

Explanation:

replace both the traditional menu bar and toolbars.

Hopefully, It's Correct... (ﾉ◕ヮ◕)ﾉ

Answer:

<b> tag is used to make the text bold. <br> tag is used to insert a line break into a text font.

Explanation:

The <b> tag in HTML is used to indicate the importance of the text. The text is written within <b> tag display in bold size. You can do that by using CSS also there is a similar tag <strong> tag that has a similar effect on content.

The <br> tag inserts a single line break. The <br> tag is useful for writing addresses or poems. The <br> tag is an empty tag which means that it has no end tag.

Here is the  linear-time algorithm

The purpose of the above algorithm is to determine whether an undirected graph G has a cycle containing a specific edge e. It aims to identify if there exists a cycle that includes the given edge within the graph.

This algorithm has a time complexity of O(V + E), where V is the number of vertices and E is the number of edges in the graph.

Learn more about  linear-time algorithm at:

https://brainly.com/question/30511610

#SPJ4

Full Question:

Although part of your question is missing, you might be referring to this full question:

Design a linear-time algorithm which, given an undirected graph G and a particular edge e in it, determines whether G has a cycle containing e. Your algorithm should also return the length (number of edges) of the shortest cycle containing e, if one exists. Just give the algorithm, no proofs are necessary. Hint: you can use BFS to solve this.

Magnetic storage stores 1 and 0 values in capacitors. Thus, option C is correct.

Solid-state storage is a type of storage that uses electronic components to store data, rather than using mechanical components like spinning disks or tapes. Solid-state storage is typically faster and more reliable than other types of storage, but it is also more expensive.

There are many benefits to using solid-state storage. For one, solid-state storage is much faster than other types of storage. This is because solid-state storage does not have to wait for the mechanical components to spin up or move into position before it can start reading or writing data. This means that solid-state storage can access data much faster than other types of storage.

Therefore, Magnetic storage stores 1 and 0 values in capacitors. Thus, option C is correct.

Learn more about capacitors on:

https://brainly.com/question/17176550

#SPJ2

Answer:

Design Process

Explanation:

The multistep process by which designers and engineers design, build, and taste a new product is called the Design Process. There are multiple steps, including exploring, designing, planning, making, testing, and revising.

Answer:

Explanation:

Because of the issues that have been sketched above, a number of other methods of project management have emerged in recent years. These methods are particularly suited for IT-development projects. Examples of these relatively new streams within project management include DSDM, RUP, eXtreme Programming (XP), RAD and agile project management (McConnell, 1996; Kroll, 2004; Chromatic, 2003; Stapleton, 2002, [ii], [iii])

Although the above-mentioned methods of project management differ according to a number of aspects, they are essentially the same. Because the path toward the final goal of IT projects has proved so uncertain, these methods assume that the goal will be achieved in a number of short cycles. This is the background for the term cyclical project management for these methods

John is on a Facetime call with his internship supervisor. This would be considered asynchronous communication since it is face-to-face online. This is a false statement.

Communication made through audio calls and video conferences are examples of synchronous communication. So as per the scenario where John is on a video call with his supervisor via the application, 'Facetime', is presenting a synchronous communication mode. Because both John and his supervisor are online and make face-to-face conversations. In contrast, when communication is made through messages and email conversations, it is referred to as asynchronous communication.

You can learn more about synchronous communication at

https://brainly.com/question/717130

#SPJ4

When the host behind the NAT router with IP address 192.168.0.100 sends an HTTP request to www., the source IP address that will be received by www. is the public IP address of the NAT router, which in this case is 178.2.0.1. This is because the NAT router performs Network Address Translation (NAT), which masks the private IP address of the host and replaces it with the public IP address of the router.

For the HTTP response sent by www. in response to the request, the destination IP address will be the public IP address of the NAT router (178.2.0.1) and the source IP address will be the IP address of the web server hosting the website (e.g. 203.0.113.1). When the response is forwarded by the NAT router to the host, the destination IP address will be the private IP address of the host (192.168.0.100) and the source IP address will be the public IP address of the web server (e.g. 203.0.113.1).

Learn more about NAT here:

https://brainly.com/question/30583473

#SPJ11

A second-grader should read between 90-120 words per minute.

Reading fluency is the capacity to read with sufficient accuracy and speed to comprehend what is being read. Fluency is influenced by the ability to recognize words quickly and read sentences without hesitation. Students may be assessed for their reading fluency to determine if they are meeting grade-level standards.To assess fluency, students may be given a reading test. In second grade, students are expected to read between 90-120 words per minute.

It is critical to evaluate the reading speed of second-grade students to ensure that they are meeting grade-level requirements. Students who are unable to read fluently may struggle with reading comprehension and fall behind in other subject areas. To assess fluency, students may be given a reading test that measures the number of words they can read accurately and quickly in one minute. Second-graders should be able to read between 90-120 words per minute. Teachers can help students improve their fluency by providing regular opportunities for reading aloud, practice with phonics, and providing access to a variety of reading materials appropriate for their reading level.

To know more about words,visit:

https://brainly.com/question/30283224

#SPJ11

Answer:

The data would be copied over to the new box

Explanation: