a. Copy the list file to your submission. b. Explain the function and final.outcome of the code. c. Find the values of CODE1 and DATA1, and show how to calculate 20-bit values of 1∘P and addr. d. Run the code. After you finish, show how to verify the final outcome. Include a screenshot as proof. e. *Add some instructions to copy the value of CODE1 into two memory locations and use RAM display to verify that its value is the segment address for the code segment. Include a screenshot as proof. This is a challenging question and no answer will be given before submission.
Answers
Step 1: Obtain the list file
You need to have access to the list file containing the code in question. The list file is typically generated during the assembly or compilation process and contains the assembled code along with additional information such as memory addresses and opcode mnemonics.
Step 2: Understand the code function and final outcome
Analyze the code in the list file to understand its function and intended outcome. This involves examining the instructions, memory addresses, and any relevant comments or documentation associated with the code. Understanding the code's purpose and intended behavior is crucial for further analysis.
Step 3: Find the values of CODE1 and DATA1
Search for the specific variables or memory locations mentioned in the code, namely CODE1 and DATA1. Locate the instructions or directives that assign values to these variables or memory locations. Note down the values assigned to them.
Step 4: Calculate 20-bit values of 1∘P and addr
Using the provided information and the code itself, calculate the 20-bit values of 1∘P (the segment address for the code segment) and addr (the address of the code segment). The calculation may involve bitwise operations, arithmetic, or other relevant calculations specified by the code.
Step 5: Run the code
If possible, execute the code using a suitable assembler, compiler, or interpreter. This will allow you to observe the behavior of the code and its outcome. Make sure you have the necessary environment and dependencies set up to execute the code correctly.
Step 6: Verify the final outcome
After running the code, analyze the output or resulting behavior to determine if it aligns with the expected outcome. Compare the final outcome with your initial understanding of the code's intended behavior. Ensure that the code executed without errors or unexpected behavior.
Step 7: Copy CODE1 value into two memory locations and verify
Follow the provided instructions to copy the value of CODE1 into two memory locations. Use the RAM display or any other suitable mechanism to verify that the value of CODE1 matches the segment address for the code segment. Take a screenshot or provide visual proof to support your verification.
Please note that for steps 5 and 7, as mentioned earlier, I am unable to directly execute code or perform actions in a specific environment. Hence, you'll need to execute the code and verify the results yourself. If you encounter any specific issues or have further questions during any of these steps, feel free to ask for assistance.
Learn more about code
brainly.com/question/15301012
#SPJ11
Related Questions
A non-cold-worked 1040 steel cylindrical rod has an initial length of 100 mm and initial diameter of 7.50 mm. is to be deformed using a tensile load of 18,000 N. It must not experience either plastic deformation or a diameter reduction of more than 1.5 x 10-2 mm. Would the 1040 steel be a possible candidate for this application
Answers
Answer:
1040 steel will be a possible candidate for this application since : Yield strength > stress
Explanation:
The 1040 steel would be a possible candidate for this application because the stress experienced by the load is Lesser than its Yield strength
Given that 1040 steel has the following parameter values
Modulus of elasticity ( GPa ) = 205
Yield strength ( Mpa ) = 450
Poisson's ratio = 0.27
limitation of = 1.5 x 10^-2 mm.
stress = Tensile load / area of steel
= 18,000 N / 4.418 * 10^-5 m^2
= 407 .424 Mpa
True or false?Inventory-risk costs are a form of carrying costs.
Answers
or...................
Answer:
i believe it is true
Explanation:
When in regular operation, ash and other debris should be removed _______ from the combustion chamber of a wood-burning heater.
Answers
When in regular operation, ash and other debris should be removed daily from the combustion chamber of a wood-burning heater.
What is meant by a combustion chamber?A wood stove radiates heat as it warms up via the stove's top and walls. The nearby region is warmed by the radiant heat, which can also warm other areas of the house thanks to the natural airflow in the building.
Fans using electric or convection power can help move this heat around to warm a bigger space. Some wood stoves use a convection chamber that wraps around the firebox to combine radiant and convection heat into a single appliance. Cool air is drawn into this convection chamber where it is heated and then circulated once again around the space.
Ash and other debris should be taken out of a wood-burning heater's combustion chamber every day when it is in regular use.
To learn more about combustion chamber refer to;
https://brainly.com/question/7324023
#SPJ4
Question 2 7 points to determine the size of a fillet weld: it is the maximum size measured it is the maximum size measured plus the tolerance it si the minimum size measured it is the minimum size measured plus the tolerance it is the maximum size measured minus the tolerance
Answers
The size of a fillet weld is determined by adding the maximum size measured and the tolerance.
In welding, a fillet weld is a commonly used type of weld that joins two pieces of metal at an angle, typically forming a triangular shape. Determining the size of a fillet weld is essential to ensure its structural integrity and meet specific design requirements. When determining the size of a fillet weld, it is necessary to consider both the maximum size measured and the tolerance.
The maximum size measured refers to the desired or specified size of the fillet weld. It represents the ideal dimensions that the weld should have. However, due to variations in the welding process and other factors, achieving an exact weld size may not always be possible. Therefore, a tolerance is applied to account for these potential variations.
The tolerance represents the acceptable deviation from the maximum size measured. It allows for slight variations in the actual size of the weld while still meeting the required specifications. By adding the tolerance to the maximum size measured, a permissible range is established, within which the fillet weld's size can vary and still be considered acceptable.
The formula for determining the size of a fillet weld, therefore, is to add the maximum size measured and the tolerance. This calculation ensures that the weld size falls within the specified range, providing flexibility for minor deviations while maintaining the overall integrity of the joint.
Learn more about fillet welds
brainly.com/question/14235016
#SPJ11
Six 20 watt, 12-volt luminaires (lighting fixtures) are supplied from a small, 12-volt transformer that is 60 feet away from the fixtures. the wire used is 14 awg. what is the voltage applied to the fixtures? use k = 11.6.
Answers
If the wire used is 14 awg. The voltage applied to the fixtures is: 8.61 volts.
Voltage applied to the fixturesFirst step is to calculate the amperes using this formula
I = P ÷ E
Where:
I =load current (amperes)=?
P =Product of voltage=(6)(20)
E =Electrical circuit's=12
Let plug in the formula
I= (6)(20) ÷ 12
I=120÷12
I= 10 amps
Second step is to calculate the Voltage drop
Using this formula
Vd = [2KIL] ÷ CMA
Where:
Vd= Voltage drop( volts)=?
K=Direct current constant=11.6
I=Load current (amperes)= 10 amps
L =Length in feet=60 feet
CMA=Circular mill area= 4110
Let plug in the formula
Vd= [(2)(11.6)(10)(60)] ÷ 4110
Vd=13,920÷4110
Vd= 3.3869 volts
Third step is to calculate Voltage at fixture
Voltage at fixtures=Electrical circuit's-Voltage drop
Voltage at fixtures=12 - 3.3869
Voltage at fixtures=8.6131 volts
Voltage at fixtures=8.61 volts (Approximately)
Therefore the voltage applied to the fixtures is: 8.61 volts.
Learn more about voltage here:https://brainly.com/question/26523307
#SPJ1
An IT manager for a small manufacturing company extracts the health records of all company employees from the system. The manager then sells the information to pharmaceutical companies as sales leads.
How should the actions of the IT manager be characterized?
a. Legal but unethical
b. Legal and ethical
c. Illegal and unethical
d. Illegal but ethical
Answers
The actions of the IT manager must be characterized as c. Illegal and unethical, because the extraction of the health records of all company employees from the system is not an activity assigned to him, and he is not authorized to do it. This responsibility corresponds to the human resources manager and his authorized employees.
Why is it illegal and unethical?Because when the manager extracts and sells this information to pharmaceutical companies as sales leads, he is committing a crime by exposing confidential information to unauthorized third parties.
All employees of a company that handles confidential information must sign a confidentiality agreement where they agree to protect it.
To learn more about confidentiality agreements, click here:
https://brainly.com/question/28335858
#SPJ4
which welwhich type of weld gage can measure angle of preparation?ing process uses an electrode to conduct an electrical current to the workpieces?
Answers
Bridge cam Gage wel type of weld gage can measure angle of preparation.
It measures linear measurements up to 60mm or 2 inches in length as well as the angle of preparation, 0 to 60 o, excess weld metal (capping size), depth of undercut, depth of pitting, fillet weld throat size, fillet leg length, misalignment (high-low), and all other variables. It has inch and millimeter measurements. Utilization is simple.
What is the purpose of a bridge cam Gage?
The Bridge Cam Gage, also referred to as the Cam bridge gauge, is a reliable gauge that can be used in the shop or on the job site. It can gauge the thickness of the throat and legs of the fillet welds, the height of the weld reinforcement, the depth of the undercut, the misalignment, and the preparation angle.
To learn more about Gage refer to:
https://brainly.com/question/13261588
#SPJ4
Bridge cam Gage wel type of weld gage can measure angle of preparation.
What is the purpose of a bridge cam Gage?The Bridge Cam Gage, also referred to as the Cam bridge gauge, is a reliable gauge that can be used in the shop or on the job site. It can gauge the thickness of the throat and legs of the fillet welds, the height of the weld reinforcement, the depth of the undercut, the misalignment, and the preparation angle.It measures linear measurements up to 60mm or 2 inches in length as well as the angle of preparation, 0 to 60 o, excess weld metal (capping size), depth of undercut, depth of pitting, fillet weld throat size, fillet leg length, misalignment (high-low), and all other variables. It has inch and millimeter measurements. Utilization is simple.Bridge cam Gage wel type of weld gage can measure angle of preparation.To learn more about Gage refer to:
brainly.com/question/13261588
#SPJ4
The UHRS platform is optimized for Edge/Internet Explorer only. You can still use your favorite browser, but keep in mind that you may experience technical issues when working on UHRS with a different browser than Edge or Internet Explorer.
UHRS is optimized for...
Answers
It is to be noted that all UHRS platforms are optimized for the popular kinds of internet browser applications.
What is a UHRS?The Universal Human Relevance System (UHRS) is a crowdsourcing platform that allows for data labeling for a variety of AI application situations.
Vendor partners link people referred to as "judges" to offer data labeling at scale for us. All UHRS judges are bound by an NDA, ensuring that data is kept protected.
A browser is a software tool that allows you to see and interact with all of the knowledgeon the World Wide Web. Web sites, movies, and photos are all examples of this.
Learn more about internet browser applications.:
https://brainly.com/question/16829947
#SPJ1
in your first job with a large u.s based steel company, you have been assigned to a team tasked with developing a new low carbon steel alloy. in the iron-carbon system, the kinetics of the austenite to pearlite transformation obeys the avrami relationship. in initial experimental data shows that the transformation reaches 40% completion in 13.1 seconds and 60% completion in 16.2 seconds. determine the time (in seconds) required for the transformation in this new steel to reach 75% completion. assume a k value of 4.46 x 10-4.
Answers
The time (in seconds) required for the transformation in this new steel to reach 75% completion will be 90sec.
What is steel?
Steel is an iron alloy with additional carbon to increase its durability and fracture resistance when compared to other kinds of iron. Many other elements may exist or be added. Corrosion and oxidation-resistant stainless steels typically require an additional 11% chromium. Steel is utilised in structures, infrastructure, tools, ships, trains, cars, machinery, electrical appliances, weaponry, and rockets due to its great tensile strength and inexpensive cost.
By aurami relationship,
fβ(t) = 1-e(-kt⁴)
so, 0.95 = 1-e(-4.46×10⁻⁴× t⁴)
-0.05= -e(-4.46×10⁻⁴× t⁴)
ln(0.05)= -4.46×10⁻⁴× t⁴
-2.9957= -4.46×10⁻⁴× t⁴
0.6716×10⁻⁴ = t⁴
t= 0.905×10sec
=9.05sec
To learn more about steel
https://brainly.com/question/15734772
#SPJ4
Zone, n = (sum of digits of your student id)% 8 for example, if your student id is 17301283, zone = (1+7+3+0+1+2+8+3) % 8 = 25 % 8 = 1 derive midpoint line drawing algorithm for a line in zone n. if you find zone 0, i.e., then drop the last digit from sum and take % 8 again. if your student id is 16240524, zone = (1+6+2+4+0+5+2+4)%8 = 24%8 = 0 updated zone by removing last digit 4 = (1+6+2+4+0+5+2)%8 =20%8 = 4 derive midpoint circle drawing algorithm for the arc of the circle in zone n. if you find zone 1, i.e., then drop the last digit from sum and take % 8 again. if your student id is 17301283, zone = (1+7+3+0+1+2+8+3)%8 = 25%8= 1 updated zone by removing last digit 3 = (1+7+3+0+1+2+8)%8 = 22%8= 6
Answers
how many slices are in a pizza
Answers
Answer:
depends on what size of pizza
Explanation:
giúp em làm câu này với ạ em cám ơn em cần gấp lắm
Answers
Answer:
the problem I see real people here to have that much respect that is not going in that direction or the best.
Fall restraint systems must meet which of the falling criteria?
Answers
To meet the necessary criteria for effective fall restraint,the principles are Adequate Anchorage,Proper Fit and Adjustment,Maximum Arrest Force,Compatibility and Integrity and Proper Training and Use.
Fall restraint systems are designed to prevent a person from falling while working at heights. To meet the necessary criteria for effective fall restraint, the system must adhere to several key principles:
1. Adequate Anchorage: The system should be securely anchored to a structure capable of withstanding the anticipated loads. Anchorage points must be structurally sound and capable of supporting the maximum forces that may be exerted during a fall.
2. Proper Fit and Adjustment: The fall restraint system should be properly fitted and adjusted to the individual worker. This includes ensuring that harnesses, belts, and lanyards are correctly sized and adjusted for the user's body type and work requirements.
3. Maximum Arrest Force: The fall restraint system should limit the maximum force exerted on the worker's body in the event of a fall. This helps minimize the risk of injury by reducing the impact force transmitted to the body during a fall arrest.
4. Compatibility and Integrity: All components of the fall restraint system must be compatible with each other and function together as intended. This includes the harness, lanyard, connectors, and anchorages.
Regular inspections and maintenance should be conducted to ensure the integrity of the system.
5. Proper Training and Use: Workers must be adequately trained in the proper use of the fall restraint system. They should understand how to properly don and doff the equipment, inspect it for defects, and recognize when the system is not suitable for use.
By meeting these criteria, fall restraint systems can effectively protect workers at heights, reducing the risk of falls and their associated injuries.
For more such questions on restraint,click on
https://brainly.com/question/24632598
#SPJ8
An electrical engineer at GRIDCO is given two separate toolboxes to keep his working tools. The first toolbox has 4 white fuses and 3 black fuses and the second toolbox has 3 white fuses and 5 black fuses. Suppose the engineer select a fuse from the first toolbox and placed unseen in the second toolbox. What is the probability that: (a) the fuse drawn from the second toolbox is black? (B) the fuse drawn from the second toolbox is white? (8) ane is white?
Answers
(a) The probability of drawing a black fuse from the second toolbox is 4/7.
(b) The probability of drawing a white fuse from the second toolbox is 3/7.
(c) The probability that one fuse is white is 27/49.
To calculate the probabilities, we need to consider the number of white and black fuses in each toolbox.
First, let's determine the total number of fuses in each toolbox:
First Toolbox:
Total fuses = 4 white fuses + 3 black fuses = 7 fuses
Second Toolbox:
Total fuses = 3 white fuses + 5 black fuses = 8 fuses
(a) The probability that the fuse drawn from the second toolbox is black:
The probability of drawing a black fuse from the second toolbox depends on the fuse selected from the first toolbox. There are two scenarios to consider:
Scenario 1: The fuse selected from the first toolbox is black.
In this case, the second toolbox will have 3 black fuses remaining out of the total 7 fuses.
Probability = (Number of black fuses in the second toolbox)/(Total number of fuses in the second toolbox)
Probability = 3/7
Scenario 2: The fuse selected from the first toolbox is white.
In this case, the second toolbox will have 5 black fuses out of the total 7 fuses.
Probability = (Number of black fuses in the second toolbox)/(Total number of fuses in the second toolbox)
Probability = 5/7
To calculate the overall probability, we need to consider the probability of each scenario and weigh it by the probability of selecting a fuse of that color from the first toolbox. Since the fuse from the first toolbox has an equal chance of being white or black, we need to take an average of the probabilities in both scenarios.
Probability of drawing a black fuse from the second toolbox = (Probability of scenario 1 + Probability of scenario 2)/2
Probability of drawing a black fuse from the second toolbox = (3/7 + 5/7)/2
Probability of drawing a black fuse from the second toolbox = 8/14
Probability of drawing a black fuse from the second toolbox = 4/7
Therefore, the probability of drawing a black fuse from the second toolbox is 4/7.
(b) The probability that the fuse drawn from the second toolbox is white:
Similarly, we can calculate the probability of drawing a white fuse from the second toolbox. It will be the complement of the probability of drawing a black fuse.
Probability of drawing a white fuse from the second toolbox = 1 - Probability of drawing a black fuse from the second toolbox
Probability of drawing a white fuse from the second toolbox = 1 - 4/7
Probability of drawing a white fuse from the second toolbox = 3/7
Therefore, the probability of drawing a white fuse from the second toolbox is 3/7.
(c) The probability that one is white:
To calculate the probability that one fuse is white, we need to consider both scenarios: either the fuse drawn from the first toolbox is white and the fuse drawn from the second toolbox is black, or the fuse drawn from the first toolbox is black and the fuse drawn from the second toolbox is white.
Scenario 1: Fuse drawn from the first toolbox is white, and the second toolbox has a black fuse:
Probability = (Probability of drawing a white fuse from the first toolbox) * (Probability of drawing a black fuse from the second toolbox)
Probability = (3/7) * (5/7)
Scenario 2: Fuse drawn from the first toolbox is black, and the second toolbox has a white fuse:
Probability = (Probability of drawing a black fuse from the first toolbox) * (Probability of drawing a white fuse from the second toolbox)
Probability = (4/7) * (3/7)
To calculate the overall probability, we need to sum up the probabilities of both scenarios:
Probability that one fuse is white = Probability
of scenario 1 + Probability of scenario 2
Probability that one fuse is white = (3/7) * (5/7) + (4/7) * (3/7)
Probability that one fuse is white = 15/49 + 12/49
Probability that one fuse is white = 27/49
Therefore, the probability that one fuse is white is 27/49.
To learn more about probability Click Here: brainly.com/question/31828911
#SPJ11
A catalytic converter has to be at least how hot before it begins to work?
Answers
Answer:
Normal operating temperatures of a converter are 500-800°F, and up to 1200°F when the vehicle is under heavy load.To melt the catalytic converter's substrate, the temperature inside the converter would have to exceed 2000°F.
Explanation:
Only put coolant into your radiator when the engine is _____.
Answers
It is to be noted that you only put coolant into your radiator when the engine is cool.
What is an Engine coolant?However, in most cases, the engine should be cold (or at most warm) before adding coolant to the radiator. Never attempt to add coolant to the radiator while the engine temperature is high, since pressurized water may escape from the reservoir when the coolant cap is unscrewed.
Antifreeze, often known as engine coolant, is a colored liquid combined with water that helps control your engine at high temperatures. To maintain a consistent operating temperature, coolant is circulated throughout the engine block when the temperature outside fluctuates from hot to cold.
Coolant aids in the removal of heat from the engine. As a result, if there is insufficient coolant, the engine may overheat or seize. Continued use of an overheated engine may cause permanent damage such as welding of the cylinder piston.
Learn more about Engine Coolant:
https://brainly.com/question/28116315
#SPJ1
computer system analyst advantage
Answers
Answer:
They help an organization realize the maximum benefit from its investment in equipment, personnel, and business processes. They use and analyze systems, interpret data, and customize systems to better meet the organization's needs.
Explanation:
brainliest plz
Answer:
ục tiêu của pháp y máy tính là kiểm tra phương tiện kỹ thuật số theo cách thức pháp y với mục đích xác định, bảo tồn, phục hồi, phân tích và trình bày các sự kiện và ý kiến về thông tin kỹ thuật số
Explanation:
will mark brainliest if correct
When a tractor is driving on a road, it must have a SMV sign prominently displayed.
True
False
Answers
Answer: true
Explanation:
La probabilidad de que un nuevo producto tenga éxito es de 0.85. Si se eligen 10 personas al azar y se les pregunta si comprarían el nuevo producto, ¿cuál es la probabilidad de que por lo menos 8 adquieran el nuevo producto?
Answers
Answer:
La probabilidad pedida es \(0.820196\)
Explanation:
Sabemos que la probabilidad de que un nuevo producto tenga éxito es de 0.85. Sabemos también que se eligen 10 personas al azar y se les pregunta si comprarían el nuevo producto. Para responder a la pregunta, primero definiremos la siguiente variable aleatoria :
\(X:\) '' Número de personas que adquirirán el nuevo producto de 10 personas a las que se les preguntó ''
Ahora bien, si suponemos que la probabilidad de que el nuevo producto tenga éxito se mantiene constante \((p=0.85)\) y además suponemos que hay independencia entre cada una de las personas al azar a las que se les preguntó ⇒ Podemos modelar a \(X\) como una variable aleatoria Binomial. Esto se escribe :
\(X\) ~ \(Bi(n,p)\) en donde \(''n''\) es el número de personas entrevistadas y \(''p''\) es la probabilidad de éxito (una persona adquiriendo el producto) en cada caso.
Utilizando los datos ⇒ \(X\) ~ \(Bi(10,0.85)\)
La función de probabilidad de la variable aleatoria binomial es :
\(p_{X}(x)=P(X=x)=\left(\begin{array}{c}n&x\end{array}\right)p^{x}(1-p)^{n-x}\) con \(x=0,1,2,...,n\)
Si reemplazamos los datos de la pregunta en la función de probabilidad obtenemos :
\(P(X=x)=\left(\begin{array}{c}10&x\end{array}\right)(0.85)^{x}(0.15)^{10-x}\) con \(x=0,1,2,...,10\)
Nos piden la probabilidad de que por lo menos 8 personas adquieran el nuevo producto, esto es :
\(P(X\geq 8)=P(X=8)+P(X=9)+P(X=10)\)
Calculando \(P(X=8), P(X=9)\) y \(P(X=10)\) por separado y sumando, obtenemos que \(P(X\geq 8)=0.820196\)
Por definición de variable aleatoria binomial, la probabilidad de que por lo menos 8 adquieran el nuevo producto es 0.8202.
En primer lugar, debes saber que la Probabilidad es la mayor o menor posibilidad de que ocurra un determinado suceso.
En otras palabras, la probabilidad establece una relación entre el número de sucesos favorables y el número total de sucesos posibles.
Por otro lado, una variable aleatoria es una función que asocia un número real, perfectamente definido, a cada punto muestral.
Una variable aleatoria es discreta si los números a los que da lugar son números enteros.
Finalmente, una distribución binomial es una distribución de probabilidad discreta que describe el número de éxitos al realizar n experimentos independientes entre sí, acerca de una variable aleatoria.
La expresión para calcular la distribución binomial es:
P(X=x)=( \(n\\ x\) ) pˣ qⁿ⁻ˣ
Donde:
n = Número de ensayos/experimentos x = Número de éxitos p = Probabilidad de éxito q = Probabilidad de fracaso (1-p)Recordar que:
( \(n\\ x\) )= \(\frac{n!}{x!(n-x)!}\)
donde el signo de exclamación representa el símbolo de factorial, es decir el producto de todos los números enteros positivos desde 1 hasta n.
En este caso, sabes que la probabilidad de que un nuevo producto tenga éxito es de 0.85 y se eligen 10 personas al azar. Entonces se define la siguiente variable aleatoria:
X= '' Número de personas que adquirirán el nuevo producto de 10 personas a las que se les preguntó ''
Suponiendo que hay independencia entre cada una de las personas al azar a las que se les preguntó, es posible usar una variable aleatoria Binomial. Siendo n el número de personas entrevistadas (en este caso, 10 personas) y p la probabilidad de éxito (una persona adquiriendo el producto, en este caso 0.85) en cada caso, la expresión a utilizar queda expresada como:
P(X=x)=( \(10\\ x\) ) 0.85ˣ (1-0.85)¹⁰⁻ˣ
P(X=x)= \(\frac{10!}{x!(10-x)!}\) 0.85ˣ (0.15)¹⁰⁻ˣ
Se desea calcular la probabilidad de que por lo menos 8 adquieran el nuevo producto. Siendo 10 las personas elegidas al azar, puede ser que sean 8,9 o 10 las personas que adquieran un nuevo producto. Entonces la probabilidad deseada es calculada como:
\(P(X\geq 8)= P(X=8) + P(X=9) + (P=10)\)
Entonces:
\(P(X\geq 8)=\) \(\frac{10!}{8!(10-8)!}\) 0.85⁸ (0.15)¹⁰⁻⁸ + \(\frac{10!}{9!(10-9)!}\) 0.85⁹ (0.15)¹⁰⁻⁹ + \(\frac{10!}{10!(10-10)!}\) 0.85¹⁰ (0.15)¹⁰⁻¹⁰
Resolviendo:
\(P(X\geq 8)=\) \(\frac{10!}{8!2!}\) 0.85⁸ (0.15)² + \(\frac{10!}{9!1!}\) 0.85⁹ (0.15)¹ + \(\frac{10!}{10!0!}\) 0.85¹⁰ (0.15)⁰
\(P(X\geq 8)=\) 45×0.85⁸×(0.15)² + 10×0.85⁹×(0.15)¹ + 1×0.85¹⁰×(0.15)⁰
\(P(X\geq 8)=\) 0.2759 + 0.3474 + 0.1969
\(P(X\geq 8)=\) 0.8202
Finalmente, la probabilidad de que por lo menos 8 adquieran el nuevo producto es 0.8202.
Aprender más sobre probabilidad y distribución binomial:
https://brainly.com/question/18735028?referrer=searchResultshttps://brainly.com/question/25008895?referrer=searchResultshttps://brainly.com/question/22304471What major financial flop led to the end of the Sega Dreamcast and ultimately caused Sega to stop making game consoles altogether?
1: The founder and CEO of Sega was found to be secretly skimming money off of the top of profits, leading to widespread distrust by the public and a sharp decline in sales until they ultimately had to shut down due to making no profit.
2: A small group of employees found a way to drain all of the Sega Corporation funding accounts and flee the country with all of the money, never to be heard from again.
3: A game called Shenmue, that cost more than $70 million to make, meant that everyone who owned a Dreamcast needed to buy two copies of the game just for Sega to make back the money they had spent to develop it-which didn't happen.
4: A game called Katamari Damacy that carried a virus that would infect any console that it was played on forced Sega to spend millions of dollars in refunds and bankrupted the company.
Answers
Answer:
The major financial flop that led to the end of the Sega Dreamcast and ultimately caused Sega to stop making game consoles altogether is:
3: A game called Shenmue, that cost more than $70 million to make, meant that everyone who owned a Dreamcast needed to buy two copies of the game just for Sega to make back the money they had spent to develop it-which didn't happen.
Explanation:
Shenmue, released on December 29, 1999, was created for Dreamcast by Suzuki. It was widely described as the most expensive video game ever produced. It had an estimated production and marketing cost of between US$47 and $70 million, according to the latest available data.
Why might these numbers be as they are?
=== Run information ===
Scheme: .RandomForest -P 100 -I 100
-num-slots 1 -K 0 -M 1.0 -V 0.001 -S 1
Relation: IN304_Data
Instances: 1000
At
Answers
The numbers you provided appear to be related to the parameters and settings of a random forest algorithm used in a data analysis or machine learning task.
Here is a breakdown of the different components: Scheme: Random Forest is a popular ensemble learning method that combines multiple decision trees to make predictions. It is known for its ability to handle complex datasets and avoid overfitting.
-P 100: This parameter specifies the number of features (variables) to consider when looking for the best split at each tree node. In this case, it is set to 100, indicating that the algorithm will randomly select 100 features out of the total available features.
-I 100: This parameter represents the number of trees to be grown in the random forest. In this case, the algorithm will create 100 decision trees.
-num-slots 1: This parameter defines the number of threads or processors that can be used to parallelize the random forest algorithm. Setting it to 1 means that the algorithm will utilize a single processor.
-K 0: This parameter is often used for feature selection and determines the number of attributes to be randomly chosen at each node of a decision tree. Setting it to 0 means that all available attributes will be considered.
-M 1.0: This parameter specifies the minimum number of instances (samples) required to split a node further. It is set to 1.0, indicating that at least one instance is needed to make a split.
-V 0.001: This parameter controls the minimum variance needed for a split. A split will only be performed if it results in a decrease in variance greater than 0.001.
-S 1: This parameter sets the random seed for the random number generator used by the algorithm. By fixing the seed to a specific value (1 in this case), the results can be replicated.
Learn more about The numbers here:
https://brainly.com/question/14299887
#SPJ11
2.12.5: Four Corners
Answers
Answer:
speed(0)
square_length = int(input("What is the length of the square?"))
def draw_square():
pendown()
for i in range(4):
forward(square_length)
left(90)
penup()
penup()
setposition(-200, -200)
draw_square()
penup()
setposition(-200, 200 - square_length)
draw_square()
penup()
setposition(200 - square_length, 200 - square_length)
draw_square()
penup()
setposition(200 - square_length, -200)
draw_square()Explanation:
The nozzle has a diameter of 40 mm. Assume water is ideal fluid, that is, incompressible and frictionless (Figure 1) Part A If it discharges water with a velocity of 20 m/s against the fixed blade, determine the horizontal force exerted by the water on the blade. The blade divides the water evenly at an angle of θ-45° Express your answer to three significant figures and include the appropriate units. Figure 1 of 1 F-Value Units 40 mm Submit Request Answer Provide Feedback Next
Answers
From the given information, we can calculate the flow rate of water through the nozzle as follows:
Q = A * V
where Q is the flow rate, A is the cross-sectional area of the nozzle, and V is the velocity of the water.
The cross-sectional area of the nozzle can be calculated as:
A = (π/4) * d^2
where d is the diameter of the nozzle.
Substituting the given values, we get:
A = (π/4) * (0.04 m)^2 = 0.0012566 m^2
The flow rate can now be calculated as:
Q = A * V = 0.0012566 m^2 * 20 m/s = 0.02513 m^3/s
The force exerted by the water on the blade can be calculated using the momentum equation:
F = ρ * Q * V * tan(θ-45°)
where ρ is the density of water, and θ is the angle at which the water hits the blade.
Assuming a density of water to be 1000 kg/m^3, we get:
F = 1000 kg/m^3 * 0.02513 m^3/s * 20 m/s * tan(θ-45°)
Substituting θ = 45° (since the water is hitting the blade at an angle of θ-45°), we get:
F = 1000 kg/m^3 * 0.02513 m^3/s * 20 m/s * tan(0°) = 0 N
Therefore, the horizontal force exerted by the water on the blade is 0 N. This is because the water hits the blade at a perpendicular angle and there is no component of force in the horizontal direction.
To know more about nozzle click here:
brainly.com/question/30896816
#SPJ4
A pinion and gear pair is used to transmit a power of 5000 W. The teeth numbers of pinion
and gear are 20 and 50. The module is 5 mm, the pressure angle is 20o
and the face width is 45 mm. The
rotational speed of pinion is 300 rev/min. Both the pinion and the gear material are Nitralloy 135 Grade2 with a hardness of 277 Brinell. The quality standard number Qv is 5 and installation is open gearing
quality. Find the AGMA bending and contact stresses and the corresponding factors of safety for a
pinion life of 109
cycles and a reliability of 0.98
Answers
Answer:
mark me as a brainleast
Explanation:
209781
To put out a class D metal fire, you must _______ the fire.
Answers
To put out a class D metal fire, you must smother the fire and eliminate the oxygen element in the fire.
What is a Class D fire?A class D fire is a type of fire that cannot be extinguished by water. This is because adding water to it reacts with other elements in the fire intensifying the fire even more.
Smothering in this context involves adding a solution like carbon dioxide (CO2) into the fire, this results in a reduction of oxygen in the atmosphere surrounding the class D fire.
By so doing, smothering the fire eliminates the oxygen element in the fire, thereby extinguishing the fire.
You can learn more about extinguishing fires here https://brainly.in/question/760550
#SPJ1
what is the correct order of statements for calculating the best path in an ospf network?
Answers
The correct order of statements for calculating the best path in an OSPF network is to gather information about the network topology, calculate the SPTs, determine the best path to a particular destination, and update the routing tables. By following these steps, network administrators can ensure that their OSPF network is optimized for efficient routing and minimal downtime.
To calculate the best path in an OSPF network, there are several statements that need to be executed in a specific order. The first statement is to gather information about the network topology, which involves identifying the routers, the links between them, and the metrics associated with those links. The next statement is to calculate the shortest path tree (SPT) for each router in the network, which determines the best path from that router to all other routers in the network.
Once the SPTs have been calculated, the third statement is to determine the best path to a particular destination, which involves comparing the costs of all the paths to that destination and selecting the one with the lowest cost. This is done by adding up the costs of the individual links along each path and selecting the path with the lowest total cost.
Finally, the last statement is to update the routing tables for each router in the network based on the information gathered from the previous steps. This ensures that all routers have the most up-to-date information about the network topology and can select the best path to any given destination.
Learn more on OSPF network here:
https://brainly.com/question/29654124
#SPJ11
What signal propagation phenomena causes the diffusion, or the reflection in multiple different directions, of a signal?
Answers
In the radio communication system, multipath is the propagation phenomenon that causes diffusion or reflection in multiple different directions of a signal.
Multipath is a propagation mechanism that impacts the propagation of signals in radio communication. Multipath results in the transmission of data to the receiving antenna by two or more paths. Diffusion and reflection are the causes that create multiple paths for the signal to be delivered.
Diffraction occurs when a signal bends around sharp corners; while reflection occurs when a signal impinges on a smooth object. When a signal is received through more than one path because of the diffraction or reflection, it creates phase shifting and interference of the signal.
You can learn more about signal propagation at
https://brainly.com/question/14452898
#SPJ4
This might count as engineering, I'm not sure as this is IT
An ordered collection of data elements stored and accessed in a program is called what?
Group of answer choices
Variables
List
Locale
Parameters
Answers
Answer:
10.5
Explanation:
Convert to an equation for example P%* X=Y
P is 7.5% X is 140, so the equation Is 7.5 percent * 14= Y
convert 7.5% Into a decimal by removing the percent sign and deviding by 7.5/100= 0.075
Substitute 0.075 for 7.5% in the equation: 7.5%*140=Y becomes 0.075*140= 10.5
if citrus overlord is 200 (I'm offering for a lucid leaf) and shiny eternal contrast is 250, 450 so far and I'm also last thing offering for lucid (which is 100 secret value and I'm offering in shiny value and Lucid's shiny value is 500 but gets op's because it's a secret pet) is a shiny dark omen which is 100, I'm offering 550 for 500 but gets op's, w or l, I think w.
Answers
Answer: I'm pretty sure your taking a W.
your getting a W, lucid isn't that bad to trade, you can probably flip lucid for more shiny's and getting a better offer because omen has bad demand and you can tell someone to switch it for something better you can flip lucid and get better pets ok so accept and trade lucid unless you wanna keep it.
Explanation:
Answer:
gg's if you did it cause w
Explanation:
A soil sample, taken from a borrow pit has a specific gravity of soil solids of 2.66. The sample was taken to a materials laboratory and tested. The results of a standard Proctor test are tabulated below.
Weight of Soil (lb) Moisture Content (%)
3.20 12.8
3.78 13.9
4.40 15.0
4.10 15.7
3.70 16.6
3.30 18.1
The maximum dry density in lb/ft3 is most nearly:_______
Answers
Answer:
115 Ib/ft^3
Explanation:
To determine the maximum dry density in Ib/ft3 we have to calculate :
Bulk unit weight ( yb ) ; W / v
Dry unit weight ( yd. ) : yb / ( 1 + w )
For every set of data given
assuming v = 1/30 ft^3
calculating for the 3 data set ( maximum dry density )
weight of soil (W) = 4.40
moisture content (%) (w) = 15.0 = 0.15
Bulk unit weight (yb) = 4.40 / (1/30) = 132 Ib/ft^3
Dry unit weight ( yd. ) = 132 / ( 1 + 0.15 ) = 114.702 Ib/ft^3
therefore after calculations the maximum dry density in Ib/ft^3 ≈ 115 Ib/ft^3