5) Estimate the cost to build a 3,500 m
2
commercial building in Toronto in 2025 . The cost of building a similar commercial building with a 4,800 m
2
floor area in Winnipeg in 2010 was $4,100,000. *Use City Cost Indexes Year 2017 Base provided in handouts and assume these CCl can be applied to Year 2010 to adjust for location "Use the Historical Cost Indexes provided in handouts

Answer:

see below

Explanation:

first of all, you find the speed of sound in air

which is

speed = frequency x wavelength

so

speed = 200 x 1.5

speed = 300 m/s

speed remains the same in the same medium

so you can use speed and frequency to find wavelength

speed = frequency x wavelength

300 = 600 x wavelength

wavelength = 0.5 m

hope this helps, please mark it brainliest

Narrow tires bikes are used in racing competitions.

Bikes that have narrow tires are used in race because narrow tires have an advantage over wider tires due to their higher speed as they provide less air resistance. Less air resistance on the bike having narrow tires allows the bike to move faster as compared to those bikes having wider tires due to more air resistance so we can conclude that bikes with narrow tires are used in racing competitions.

Learn more: https://brainly.com/question/24862912

Road bikes are meant for optimum performance

The option that gives the type of bikes that have the given specifications is the option;

Reason:

A road bike is a bike usually for competitive driving, meant for roads and that are paved roads, and not for racing tracks or rough terrains.

The specifications of a road bike are;

The frames are very lightweight, including the wheels and other parts

The handlebar is curled

The wheels of the tires are narrow

A front fork made of carbon fiber composite

It does not have have front or rear suspension

Includes variety for male and female riders

Therefore, the correct option is; road

Learn more here:

https://brainly.com/question/21062079

Answer:

B) 350 kg m/s

Explanation:

momentum or p is given by the equation p= mxv

We have the mass and velocity so we can use the equation directly

p= 72kg x 4.9 m/s

p= 352.8 kg m/s

Value analysis is a method used to evaluate the worth and effectiveness of an organization or project.

In the case of DEWA (Dubai Electricity & Water Authority), conducting a value analysis can provide insights into the overall value created by the organization. Here are some key points to consider in a value analysis of DEWA:

1. Service Quality: Evaluate the quality and reliability of the electricity and water services provided by DEWA. Assess factors such as uptime, response time, customer satisfaction, and the overall impact on the daily lives of residents and businesses in Dubai.

2. Cost Efficiency: Analyze the cost-effectiveness of DEWA's operations, including the generation, transmission, and distribution of electricity, as well as water production and distribution. Assess the efficiency of resource utilization, cost management practices, and the impact on consumer tariffs.

3. Sustainability: Evaluate DEWA's commitment to sustainable practices, such as renewable energy integration, water conservation efforts, and environmental stewardship. Assess the organization's contributions to reducing carbon emissions and promoting a greener future.

4. Innovation and Technology: Assess DEWA's adoption of innovative technologies, such as smart grids, advanced metering systems, and digital solutions. Evaluate the impact of these technologies on service delivery, efficiency, and customer experience.

5. Stakeholder Engagement: Analyze DEWA's relationships with stakeholders, including customers, suppliers, government entities, and the community. Assess the effectiveness of communication, collaboration, and the organization's contribution to social and economic development in Dubai.

By conducting a comprehensive value analysis of DEWA, stakeholders can gain a holistic understanding of the organization's performance, impact, and value proposition. This analysis can guide decision-making, identify areas for improvement, and support DEWA's ongoing efforts to provide reliable, sustainable, and affordable electricity and water services to the residents and businesses of Dubai.

Learn more about Value analysis here:

brainly.com/question/30132218

#SPJ11

The current in the circuit is not same across all the component so is it a parallel circuit​.

If the current in a circuit is not the same across all components, then it is likely a parallel circuit. In a parallel circuit, the current has multiple paths to flow through, allowing it to divide among the different branches. Each component in a parallel circuit is connected to the same two points, forming separate branches, and the total current entering the circuit is divided among these branches.

In a parallel circuit, the voltage across each component remains the same, while the current varies based on the resistance of each branch. This is because the voltage across any two points in a parallel circuit is constant, as they are directly connected to the same voltage source. The total current entering the circuit is the sum of the currents flowing through each branch.

If the current were the same across all components, it would indicate a series circuit. In a series circuit, the current has only one path to flow through, passing through each component in succession. In this case, the current remains constant throughout the circuit, while the voltage across each component may vary based on their individual resistances. Therefore, it is more likely that the circuit in question is a parallel circuit.

Know more about parallel circuit here:

https://brainly.com/question/19509255

#SPJ8

To make forensically sound copies of digital information, there are several methods that can be used. The most commonly used method is disk imaging, which creates a bit-by-bit copy of the original data without altering any of the contents.

Part 3: To make forensically sound copies of digital information, there are several methods that can be used. The most commonly used method is disk imaging, which creates a bit-by-bit copy of the original data without altering any of the contents. Another method is to create a checksum of the original data and compare it to the copied data to ensure that they match. Additionally, data carving can be used to extract specific data files from the original data without copying everything.
Part 4: Proactive measures that can be taken with IoT Digital Forensic solutions include implementing network security measures such as firewalls and intrusion detection systems, using encryption to protect sensitive data, regularly backing up data, and conducting regular security audits and assessments.
Part 5: The standardization of ISO/IEC 27043:2015 provides a framework for incident investigation principles and processes, which can be applied to IoT devices. This standardization helps to ensure that digital forensic investigations are conducted in a consistent and reliable manner, regardless of the type of device or information being investigated.
Part 6: Over the next five years, there should be a greater focus on developing and implementing secure IoT devices and solutions. This includes incorporating strong encryption and authentication mechanisms, implementing regular security updates, and conducting rigorous security testing and evaluations. Additionally, there needs to be greater collaboration and standardization within the industry to ensure that all IoT devices are held to the same high security standards.

To know more about IoT visit: https://brainly.com/question/29746263

#SPJ11

Answer:

because sound needs medium to transmit.

The sound is produced by vibration and if there is no medium there is no vibration and no vibration means no sound.

The direction of magnetic field force will not change.

What is a Magnetic field?

We must first comprehend how a charged particle moves in a constant magnetic field. Imagine B is the particle charge, the constant magnetic field q is emitted with a speed v in the magnetic field's uniformity.

Mathematically, the force resulting from moving the charged particle in a uniform magnetic field is stated as:

F=qv  ×B

We will now calculate the force that results from moving the proton in a consistent magnetic field. In a homogeneous magnetic field, the magnetic force on a moving charged particle is represented as

F=q v B sinθ

=1.6×10-19×5×104×0.12×sin90° (v ⊥B : θ=90°)

=1.6×10-19×5×104×0.12×1

⇒ F =9.6×10-16N

No, it won't change since the proton is a positively charged particle and its route is perpendicular to the magnetic field; as a result, the magnetic field, which is "directed vertically downward," won't alter the proton's charge.

To learn more about Magnetic field visit here:

https://brainly.com/question/7802337

#SPJ4

The principle of conservation of energy cannot be used to calculate their final speed.

The principle of conservation of energy can be used to calculate the final speed of the person swinging on a rope.

The initial potential energy of the person is converted into kinetic energy as they swing down.

The tension in the rope and the force of air resistance will act to slow the person down, but if these forces are small enough, the person will reach a maximum speed at the bottom of the swing. The final speed can be calculated using the following equation:

v_f = sqrt(2gh)

where:

v_f is the final velocity

g is the acceleration due to gravity (9.8 m/s^2)

h is the height of the swing

If the tension in the rope and the force of air resistance are too large, the person will not reach a maximum speed and their speed will continue to decrease as they swing down.

In this case, the principle of conservation of energy cannot be used to calculate their final speed.

Learn more about energy with the given link,

https://brainly.com/question/13881533

#SPJ11

They have a limited supply in nature, therefore if they are used excessively, they will become exhausted.

Today, we recognise that using fossil fuels has a negative impact on the environment. Fossil fuels produce and utilise local pollutants, and their continued use permanently alters the temperature of our entire world.

Wastes from combustion sources are those that result from carbon pollution (i.e., coal, oil, natural gas). Included in this are all ash and particles taken out of the flue gas.

The fossile fuel is limited in nature. So, it should not waste energy from fossil fuels.

More about the fossile fuel link is given below.

https://brainly.com/question/3371055

#SPJ1

Explanation:

The distance traveled north ward  = 2 miles

       distance traveled south ward  = 3miles

 Displacement is the distance traveled in a specific direction. So, it depend on the start and finish point.

       The displacement  = 3 miles  - 2miles  = 1mile southward

Distance is the total length of path;

        Distance  = 3 miles + 2 miles = 5miles

Answer:

newton's 2nd  law

Explanation:

In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.

Answer:

Explanation:

a) The total distance travelled by Mary will be addition of the distances travelled in all directions.

Total distance travelled = 1 mile + 2.5 mile + 1.5miles + 0.75 miles

Total distance travelled = 5.75 miles

Hence the total distance traveled by Mary in her entire journey is 5.75 miles

b) Displacement is the total distance travelled in a specified direction. The displacement = 2.5 miles + (1.5- 0.75) miles = 3.25 miles

c) Speed is the change in distance with respect to time.

Speed = distance/time

Speed = 5.75/30

Speed = 0.193mi/hr

d) Average velocity is the change in displacement  with respect to time.

Velocity = displacement/time

Velocity = 3.750/30

Velocity = 0.125mi/hr

Answer: It was on between 7 and 7.30 and also between 8 and 8.30 (when the line on the graph goes up only). So it was on for an hour or 60 minutes

When we Click Play() the motion of a transverse wave is from left to right and when we Click Reset() the motion of a wave and hand both is left to right.

Wave motion is the regular and orderly movement of disturbances, or departures from equilibrium or rest, from one location to another. The most well-known waves are surface waves on water, but waves can also be seen in sound waves, light waves, and subatomic particle movements.

When we Click Play() the motion of a transverse wave will be from left to right but the movement of particles will be up and down and in conclusion the wave moves left and right and the hands move up and down.

Now, when we Click Reset() and choose the Longitudinal wave and increase the Amplitude to 20. 0 cm. and then  Click Play the motion of the longitudinal wave and the hand both is left to right.

Learn more about transverse waves

brainly.com/question/13863548

#SPJ4

Answer:

I think milligram is the correct answer.

Answer:

D. milliliter

Explanation:

Took it on usatestprep

Answer: mixture

Explanation: mixture contains two or more substances which are not chemically bonded together

Answer:

B. Mixture

Explanation:

The magnitude of the average force is -1.5×10³ N.

What is force?

A force is any action that seeks to preserve, modify, or deform a body's motion.

We know,

The magnitude of the average force is:

F = m(v-u)/t

F = Average force

m = mass of the cyclist

v = Final velocity

u = Initial velocity

t = time.

Putting values into the formula

F = 50(0-10)/0.5

F = -1500 N

F = -1.5×10³ N

The negative sign is the force act against the motion of the cyclist.

To know more about force, check out https://brainly.com/question/12785175

#SPJ1

Answer:

10

Explanation:

Givens

vi = 20 m/s

vf = 60 m/s

t = 4 second.

Formula

a = (vf - vi) / t

a = (60 - 20)/4

a = 40 / 4

a = 10 m/s^2

Answer: B

Explanation: Yes it is b, because the lightbulb won’t matter just the circuit and flow of the cable.

The RPM of a belt-driven blower can be determined by considering the pulley sizes and the speed ratio between them. By calculating the speed ratio and knowing the RPM of one pulley, the RPM of the blower can be determined.

The RPM (revolutions per minute) of a belt-driven blower can be determined by analyzing the pulley system. The pulley system consists of two pulleys connected by a belt. The first step is to determine the speed ratio between the two pulleys. This is done by dividing the diameter of the driven pulley (connected to the blower) by the diameter of the driving pulley (connected to the power source). The speed ratio represents the number of revolutions the driven pulley will make for each revolution of the driving pulley.

Next, the RPM of the driving pulley needs to be known. This can be measured directly if it is connected to a motor with a known RPM. Alternatively, if the motor's RPM is known, the RPM of the driving pulley can be assumed to be the same as the motor's RPM.

Finally, the RPM of the blower can be calculated by multiplying the RPM of the driving pulley by the speed ratio. This will give the number of revolutions per minute that the blower will rotate at when the pulley system is in operation.

To learn more about RPM refer:

https://brainly.com/question/15393374

#SPJ11

The mass of a supermassive black hole thought to power a typical bright active galactic nucleus is roughly D) 1 billion solar masses. These black holes play a crucial role in the activity and evolution of their host galaxies.

The correct option is d

The mass of a supermassive black hole that powers a typical bright active galactic nucleus is not a straightforward answer, but rather a long answer. Generally, these black holes are believed to range from millions to billions of solar masses, with some even reaching trillions of solar masses. This estimation is based on observations of the properties of the galaxy hosting the active nucleus, as well as the behavior and characteristics of the surrounding gas and stars.

The mass of the black hole can be inferred through various methods, such as studying the motion of stars near the black hole or analyzing the emission from the accretion disk surrounding the black hole. So, in short, the answer to the question is D) 1 billion solar masses, but the long answer includes a range of masses that may be present in different active galactic nuclei.

To know more about galactic nucleus visit:-

https://brainly.com/question/29493107

#SPJ11

The velocity of the stone will be zero and the acceleration due to gravity will be maximum when it reaches its highest point.

When the stone is thrown up, it goes on moving against gravity and then at some point, it will lose its upward velocity and eventually come to rest for a moment. This is the highest point of the motion of the stone. At this point, the velocity of the stone will be zero and the acceleration due to gravity will be maximum. The acceleration due to gravity is the maximum at the highest point because, at this point, the direction of the velocity changes from upward to downward. At this point, the velocity and acceleration of the stone are both zero.

In conclusion, the highest point of a stone thrown straight up is the point where the velocity of the stone will be zero and the acceleration due to gravity will be maximum.

To know more about velocity visit:

brainly.com/question/33382763

#SPJ11

The occurrence of two high tides and two low tides at a specific location on Earth's surface, caused by the gravitational pull and inertia creating water bulges, forms a daily cycle referred to as the tidal cycle.

The gravitational pull of the moon is the primary cause of tides on Earth's surface. The moon's gravitational force creates two tidal bulges on opposite sides of the Earth, causing a water bulge to appear on both the side of the Earth nearest and the farthest from the moon.

This creates two high tides and two low tides per day.The tidal cycle, which is caused by the Earth's rotation beneath the water bulges, takes roughly 24 hours and 50 minutes to complete.

The tidal range, or the difference between the high and low tide, can vary depending on several factors, including the moon's position relative to the Earth and the geography of the coastline.

Tides are essential for a variety of reasons, including maintaining the ocean's health, influencing the weather, and regulating coastal ecosystems.

The energy derived from tides can also be utilized for the production of electricity.Tides have a significant impact on shipping, fishing, and other coastal activities, and understanding tides is essential for navigating the ocean safely.

Learn more about tides at: https://brainly.com/question/2604305

#SPJ11

Explanation:

The frequency of blue light that has a wavelength of 450 nm is 6.7×1014 6.7 × 10 14 Hz.

The mechanism that causes the air to rise and cool on the windward side of the mountain range is convection, which plays a significant part in creating the rain shadow effect.

For more information on convection kindly visit to

https://brainly.com/question/30789977

#SPJ1

Answer:

D

Explanation:

Because full time 4WD does not allows the driver to select 2WD or 4WD. And part-time 4WD does not includes a differential or viscous coupling that allows the front and rear axles to rotate at different speeds.